Digitus WLAN Broadband Router DN-7017 ユーザーズマニュアル

 

 

This is a step-by-step instruction on how to start using the router and get connected to the 

Internet. 

 

1)  Setup your network as shown in the setup diagram below.   

 

 

 

 

 

 

 

 

 

 

 

2)  You then need to set your LAN PC clients so that it can obtain an IP address automatically. 

By default the Broadband Router’s DHCP server is enabled so that you can obtain an IP 

address automatically.   

Note: Please make sure that the Broadband router’s DHCP server is the only DHCP 

server available on your LAN. If there is another DHCP on your network, then you’ll need 

to switch one of the DHCP servers off. 

3)  Once your PC has obtained an IP address from your router, enter the default IP address 

192.168.2.1 (broadband router’s IP address) into your PC’s web browser and press 

<enter>