Equip 4-Port Desktop KVM Switch 331504 ユーザーズマニュアル

Manual_

Page 9

www.equip-info.net

7.2.2 Auto-Scan Function

Hot Key:  

[Scroll] -> [Scroll] -> [S] -> [Enter] to BEGIN. 

[Scroll] -> [Scroll] -> [S] -> [Enter] to STOP.

You can activate the Auto-Scan function by using the following two-step Hot Key

sequence. To send commands to the Combo KVM Switch, press the [Scroll] key twice

(Step 1), then press [S] and then press [Enter] (Step 2). When you press the Auto-Scan hot

key sequence, the Combo KVM Switch alternates between the two or four PCs and dis-

plays them on the monitor.

Each PC is display one of time interval from 5 ~ 250 seconds (The interval is adjustable)

before switching to the next. When you press the Auto-Scan Hot Key sequence again, the

Auto-Scan will stop and the monitor screen will jump back to the original PC.

Adjustable scan time interval setting ( 5 ~ 250 sec. )

Hot-key: 

Pressing the <Scroll >, <Scroll > then <S> and <5 ~250 > <Enter>

7.2.3 Beeper Enable

Hot Key: 

[Scroll] -> [Scroll] -> [B] -> [Enter] to Disable 

[Scroll] -> [Scroll] -> [B] -> [Enter] to Enable

The Speaker/Beeper’s default setting is “Enable”. While the switching connections are

activated and Speaker/Beeper is in “Enable” status, the beeper has a short beeping

sound.