MuxLab 500111-2PK プリント
CCTV IP PoE Extender
500111, 500111-2PK
MuxLab 2012 Rev B CCTV IP PoE Extender
Overview
The CCTV IP PoE Extender (500111) allows one
IP camera (14 Watts) to be connected up to 1600
ft (500 m) via a single 75-ohm coax cable in a
point-to-point configuration. The product works in
pairs and the power consumption is low enough
so that it does not load the PoE source or switch.
The maximum distance depends on the grade of
coax cable and the power consumption of the
camera.
The CCTV IP PoE Extender (500111) allows one
IP camera (14 Watts) to be connected up to 1600
ft (500 m) via a single 75-ohm coax cable in a
point-to-point configuration. The product works in
pairs and the power consumption is low enough
so that it does not load the PoE source or switch.
The maximum distance depends on the grade of
coax cable and the power consumption of the
camera.
Applications
Campus, highways, airports, hotels, casinos,
commercial complexes, remote parking lots, entry
gates, self-storage, hospitals, car dealerships,
prisons, network connections
Campus, highways, airports, hotels, casinos,
commercial complexes, remote parking lots, entry
gates, self-storage, hospitals, car dealerships,
prisons, network connections
Benefits
Preserve investment in coax infrastructurre
Network connections in harsh electrical areas
Preserve investment in coax infrastructurre
Network connections in harsh electrical areas
Features
Used in pairs (sold separately or as 2-pack)
Connects IP PoE camera to 10/100BaseT PoE
switch via single coax cable
Up to 330 ft (100m) @ 100Mbps @ 14W
Mode switch to select PoE Mode A or B
Does not require external PSU
Works with MuxLab mounting accessories
Used in pairs (sold separately or as 2-pack)
Connects IP PoE camera to 10/100BaseT PoE
switch via single coax cable
Up to 330 ft (100m) @ 100Mbps @ 14W
Mode switch to select PoE Mode A or B
Does not require external PSU
Works with MuxLab mounting accessories
Specifications
Environment
PoE CCTV IP
Devices
PoE CCTV IP cameras with a 10/100Mb/s Ethernet port, using up to 14 Watts.
PoE network switches with PoE Mode B and Auto MDIX for crossover
PoE network switches with PoE Mode B and Auto MDIX for crossover
Standard supported
Ethernet side:
IEEE 802.3 10BaseT,
IEEE 802.3U 100Base-TX
IEEE 802.3af compatible PoE. PoE Mode B
Auto MDIX cross-over
IEEE 802.3 10BaseT,
IEEE 802.3U 100Base-TX
IEEE 802.3af compatible PoE. PoE Mode B
Auto MDIX cross-over
Maximum distance vs.
speed between unit
speed between unit
10 Mbps at 7W: 1600ft (500m)
10 Mbps at 14W: 1000ft(300m)
100 Mbps at 14W: 330ft (100m)
The maximum distance will vary depending on the coax cable.
10 Mbps at 14W: 1000ft(300m)
100 Mbps at 14W: 330ft (100m)
The maximum distance will vary depending on the coax cable.
Cable between unit
Coax 75 ohm RG59/RG6 or better. (avoid CCS cable)
Cable for Ethernet port
(Not included)
(Not included)
CAT 5/5e/6 UTP, up to 10ft (3m).
Indicator
Power present.
Ethernet connector
One RJ45S.
Connector to connect
the two units
the two units
BNC 75 ohms
PoE Mode Switch
Manual switch selects between PoE Mode A or Mode B.
Mode A: For use with PoE switches (factory default)
Mode B: For use with PoE power injectors
Mode A: For use with PoE switches (factory default)
Mode B: For use with PoE power injectors
Power consumption
0.5 Watts, from the PoE. No external supply required.
Temperature
Operating: 0° to 60°C
Storage: -55° to 85°C
Humidity: Up to 95% non-condensing
Enclosure
Plastic
Dimensions
2.40” x 2.25” x 1.00” (6.1 x 5.7 x 2.54 cm)
Weight
Approx. 1 lb. (0.5 kg)
Compliance
Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty
2 years
Ordering information
500111
CCTV IP PoE Extender
500111-2PK CCTV IP PoE Extender, 2-pack