Lenovo 3630 M4 7158A3G ユーザーズマニュアル
製品コード
7158A3G
IBM System x3630 M4 (E5-2400 v2)
24
The slot form factors with 2U risers (models without the rear HDD cage assembly) are as follows:
Slot 1: PCIe 3.0 x16 (x8-wired), optional PCIe 3.0 x16 (x16-wired); full-height, full-length
Slot 2: PCIe 3.0 x16 (x8-wired); full-height, half-length (not present if optional x16-wired slot 1 riser is
used)
Slot 3: PCIe 3.0 x16 (x8-wired), optional PCIe 3.0 x16 (x16-wired); low-profile, half-length (the second
Slot 3: PCIe 3.0 x16 (x8-wired), optional PCIe 3.0 x16 (x16-wired); low-profile, half-length (the second
processor is required to use this slot)
Slot 4: PCIe 3.0 x16 (x8-wired); low-profile, half-length (not present if optional x16-wired slot 3 riser is
Slot 4: PCIe 3.0 x16 (x8-wired); low-profile, half-length (not present if optional x16-wired slot 3 riser is
used, the second processor is required to use this slot)
Slot 5: PCIe 3.0 x8 (x4-wired); dedicated slot for ServeRAID adapter; standard on hardware RAID
Slot 5: PCIe 3.0 x8 (x4-wired); dedicated slot for ServeRAID adapter; standard on hardware RAID
models, optional on software RAID models
Note:
Standard models with software RAID (ServeRAID C105) ship with one 2U riser supplying slots 1
and 2 (slots 3, 4, and 5 are not present). Standard models with hardware RAID adapters (ServeRAID
M1115 or M5110) ship with two 2U risers supplying all five slots. See Table 13 for details.
The slot form factors with 1U risers (models with the rear HDD cage assembly) are as follows:
Slot 1: PCIe 3.0 x8 (x8-wired), optional PCIe 3.0 x16 (x16-wired); full-height, half-length
Slot 2: PCIe 3.0 x8 (x8-wired); low-profile, half-length (not present if an optional x16-wired slot 1 riser
is used)
Slot 3: PCIe 3.0 x8 (x4-wired), optional PCIe 3.0 x8 (x8-wired); dedicated slot for ServeRAID adapter
Slot 3: PCIe 3.0 x8 (x4-wired), optional PCIe 3.0 x8 (x8-wired); dedicated slot for ServeRAID adapter
(x8-wired slot requires the second processor, x4-wired slot does not require the second processor)
Note:
The 3.5" Hot Swap Cage Assembly, Rear, 2 x 3.5" option, part number 00Y7548, ships with two 1U
risers supplying x8-wired slots 1 and 2 and x4-wired slot 3. See Table 14 for details.
The following two tables lists the I/O riser card options, the 2U riser options and the 1U riser options.
Table 13. 2U I/O riser card options
Part
number
number
Feature
code
code
Description
Maximum
supported
supported
Standard models
where used
where used
2U Riser 1 option (supplies slots 1 and 2)
None*
A4LY
PCIe Riser Card 1 (1 x8 FH/FL + 1 x8 FH/HL Slots) v2
1
A3x, A5x, B3x,
B5x, C3x, D3x,
F5x, G3x
00Y7550 A4TC
PCIe Riser Card 1 (1 x16 FH/FL Slot) v2
1
-
2U Riser 2 option (supplies slot 3, 4, and 5)
00AL310 A4LZ
PCIe Riser Card 2 (2 x8 LP Slots + 1 x4 LP for Slotless
RAID) v2
1
B5x, C3x, D3x,
F5x, G3x
00Y7551 A4TD
PCIe Riser Card 2 (1 x16 LP Slot + 1 x4 LP for Slotless
RAID) v2
1
-
* This riser card is installed in all standard models. It can also be used in CTO or special bid models.