Philips Cloud Monitor Base SB4B1927VB SB4B1927VB/00 ユーザーズマニュアル

1

1. Important

1.  Important

This electronic user’s guide is intended for 

anyone who uses the Philips cloud monitor 

base. Take time to read this user manual before 

you use your cloud monitor base. It contains 

important information and notes regarding 

operating your monitor.
The Philips guarantee applies provided the 

product is handled properly for its intended use, 

in accordance with its operating instructions and 

upon presentation of the original invoice or cash 

receipt, indicating the date of purchase, dealer’s 

name and model and production number of the 

product.

1.1  Safety precautions and 

maintenance

 Warnings

Use of controls, adjustments or procedures 

other than those specified in this documentation 

may result in exposure to shock, electrical 

hazards and/or mechanical hazards.
Read and follow these instructions when 

connecting and using your cloud monitor base.

Operation

•  Please Keep the cloud monitor base out of 

direct sunlight, very strong bright lights and 

away from any other heat source. Lengthy 

exposure to this type of environment may 

result in discoloration and damage to the 

cloud monitor base.

•  Remove any object that could fall into 

ventilation holes or prevent proper cooling 

of the cloud monitor base’s electronics.

•  Do not block the ventilation holes on the 

cabinet.

•  When positioning the cloud monitor base, 

make sure the power plug and outlet are 

easily accessible.

•  If turning off the cloud monitor base by 

detaching the power cable or DC power 

cord, wait for 6 seconds before attaching 

the power cable or DC power cord for 

normal operation.

•  Please use approved power cord provided 

by Philips all the time. If your power cord 

is missing, please contact with your local 

service center. (Please refer to Customer 

Care Consumer Information Center)

•  Do not subject the cloud monitor base to 

severe vibration or high impact conditions 

during operation.

•  Do not knock or drop the cloud monitor 

base during operation or transportation.

Maintenance

•  To protect your cloud monitor base from 

possible damage, do not put excessive 

pressure on the LCD panel. When moving 

your cloud monitor base, grasp the frame 

to lift; do not lift the cloud monitor base by 

placing your hand or fingers on the LCD 

panel.

•  Unplug the cloud monitor base if you are 

not going to use it for an extensive period 

of time.

•  Unplug the cloud monitor base if you need 

to clean it with a slightly damp cloth. The 

screen may be wiped with a dry cloth 

when the power is off. However, never 

use organic solvent, such as, alcohol, or 

ammonia-based liquids to clean your cloud 

monitor base.

•  To avoid the risk of shock or permanent 

damage to the set, do not expose the 

cloud monitor base to dust, rain, water, or 

excessive moisture environment.

•  If your cloud monitor base gets wet, wipe it 

with dry cloth as soon as possible. 

•  If foreign substance or water gets in your 

cloud monitor base, please turn the power 

off immediately and disconnect the power 

cord. Then, remove the foreign substance 

or water, and send it to the maintenance 

center.

•  Do not store or use the cloud monitor 

base in locations exposed to heat, direct 

sunlight or extreme cold.