Funkwerk W2002 Access Point 700177 (5401092782) ユーザーズマニュアル

Bridging

Transparent Mode

Ethernet Blue Book

Supported by all ComPoint Variations.

Buffer Pool

For compensation of load peaks

QoS

Data Priorisation for IP-TOS evaluation, 802.11e/WMM

BLD

Broken Link Detection (BLD) per SSID possible.

Statistics

Wireless Extended Statistics, Sorted by clients and by data rate.

Console Logging

Events via Telnet and HTTP visible

Syslog

Client, with different levels of messaging.

DHCP

Client

Power Management For Clients

Number of Managed Clients per Radio: Up to 250 at the same time.

ARP

Address Resolution Protocol: Translation for wireless clients enable/disable

IAPP

Roaming with Artem Inter-Access-Point-Protocol (IAPP)

WDS

Wireless Distribution System: Interoperabel with other devices from the Funkwerk-EC Portfolio

Bridge: Point-To-Point /
Point-To-Multipoint

Point-To-Point Connection Between Two ComPoints; Point-To-Multipoint Connection Between
one ComPoint and up to six partner ComPoints

Bridge

Full Remote Configuration: Proprietary Artem protocol with encrypted transmission. RTS/CTS
Threshold: Adjustable; Operating Channels: According to the regulatory domain. Transmit
Speed: Auto fallback or selectable fixed rate.

Linktest

Via the linktest the quality of a bridge link can be measured.

Bridgelink encryption

With high sequrity TKIP and AES possible

Standards

Wi-Fi Certification for IEEE 802.11g; IEEE 802.11a,b,g,d,h,i; IEEE 802.3, IEEE 802.3af, IEEE
802.1q (VLAN Tagging)

Certifications

R&TTE Directive 1999/5/EG; EN 60950 (IEC60950); EN 300 328-1/2; ETSI EN 301 489-1/17,
EN60601-1-2 (medical)

LAN / WAN

2 x 10/100 Mbps Ethernet twisted pair, autosensing, auto MDI/MDI-X

WLAN

W1002/W2002: IEEE 802.11b/g 1 or 2 internal radio modules, 2,4 und 5GHz Band, 2 or 4
external antennas (Antenna Diversity), max. 100mW RF output power

Antenna

Antenna connector: RTNC jack

Real time clock

Even at power loss the system time will be available for several hours.

Power supply

External AC/DC converter 12 V DC, 1 A

PoE

Power-Over-Ethernet compliant to IEEE 802.3af, the injector must support maximum power
(class 0)

Status LEDs

W1002: Status+Activity for WLAN, Ethernet 1, Ethernet 2; W2002: Status+Activity for WLAN
1, WLAN 2, Ethernet 1, Ethernet 2

Wall mounting kit

Optional

Dimensions

Approx. 16.3 cm by 16.8 cm by 5 cm (w by h by d)

Weight

Approx. 200 g

Power consumption

Max. 1A at 12V

Environment

Temperature range: Operational 0°C to 40°C; Storage -10°C to 70°C; Max. rel. humidity 10 -
95% (non condensing)

  Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
  Phone: +49 - 180 300 9191 0
  Fax: +49 - 180 300 9193 0
  E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com  

Funkwerk W1002 | W2002
19.03.2007
Subject to technical
alterations