Lancom Systems 1722 LS61350 ユーザーズマニュアル

LANCOM 1722 VoIP

Router

IP, IPX and NetBIOS/IP multi- protocol router

HTTP

HTTP and HTTPS server for configuration by web interface

DNS

DNS client, DNS server, DNS relay, DNS proxy and dynamic DNS client

DHCP

DHCP client, DHCP relay and DHCP server with autodetection

NetBIOS

NetBIOS/IP proxy

NTP

NTP client and SNTP server, automatic adjustment for daylight- saving time

Policy- based routing

Policy- based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to 
particular remote sites or lines.

Dynamic routing

Dynamic routing with RIPv2. Learning and propagating routes; separate settings for LAN and WAN

IP

ARP, proxy ARP, BOOTP, LANCAPI, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP- 1, RIP-
2, RTP, SIP, SNMP, TCP, TFTP, UDP, VRRP

IPX

RIP, SAP, IPX and SPX watchdogs, NetBIOS watchdogs

ADSL, Ethernet

PPPoE, PPPoA, IPoA, Multi- PPPoE, ML- PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP), RIP- 1, RIP- 2

ISDN

1TR6, DSS1 (Euro- ISDN), PPP, X75, HDLC, ML- PPP, V.110/GSM/HSCSD, CAPI 2.0 via LANCAPI, Stac data compression

WAN: ADSL

ADSL over ISDN compliant with ITU G.992.1 Annex B (compatible to Deutschen Telekom U- R2 connections) or ADSL over POTS 
compliant with ITU G.992.1 Annex A

WAN: ADSL2+

ADSL over ISDN compliant with ITU 992.3, ITU G.992.5 Annex B (ADSL2+) or ADSL over POTS compliant with ITU G992.3 and 
ITU G.992.5 Annex A (ADSL2+)

Ethernet ports

4 individual 10/100- Mbps Fast Ethernet ports; up to 3 ports can be switched as additional WAN ports with load balancing

-  freely configurable

Each Ethernet port can be freely configured (LAN, DMZ, WAN, monitor port, off). LAN ports can be operated as a switch or 
separately. Additionally, external DSL modems or termination routers can be operated as a WAN port with load balancing and 
policy- based routing. DMZ ports can be operated with their own IP address range without NAT

ISDN

2 ISDN ports S0 bus, NT/TE mode with cross- over adapter, switchable termination, power relay and signaling pass- through 
(lifeline support) switchable to ISDN2

Serial interface

Serial configuration interface / COM port (8 pin Mini- DIN): 9,600 -  115,000 baud, suitable for optional connection of analog/
GPRS modems

USB 2.0 printer port

USB 2.0 full- speed host port for connecting USB printers per RAW- IP and LPD; bi- directional data exchange is possible (max. 
12 Mbps, not for active- bus fed devices) 

LANconfig

Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous 
remote configuration and management of multiple devices over ISDN dial- in or IP connection (HTTPS, HTTP, TFTP)

LANmonitor

Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and 
connections, incl. PING diagnosis

Webconfig

Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP

Access rights

Individual access and function rights for up to 16 administrators

User administration

RADIUS user administration for dial- in access (PPP/PPTP and ISDN CLIP)

Remote maintenance

Remote configuration with Telnet/SSL, SSH (with password or certificate), browser (HTTP/HTTPS), TFTP or SNMP, firmware upload 
via HTTP/HTTPS or TFTP

ISDN remote maintenance

Remote maintenance over ISDN dial- in with calling- number check

Security

Access rights (read/Write) over WAN or (W)LAN can be set up separately (VPN only, Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access 
control list

Scripting

Scripting function for batch- programming of all command- line parameters and for transferring (partial) configurations, 
irrespective of software versions and device types, incl. test mode for parameter changes

SNMP 

SNMP management via SNMP V2, private MIB exportable by WEBconfig, MIB II

Timed control

Scheduled control of parameters and actions with CRON service 

TFTP

TFTP client and server with variable file names (name, MAC/IP address, serial number)

Diagnosis

Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging 
buffer for SYSLOG and firewall events, monitor mode for Ethernet ports