Uniwide UniServer 1522VA 008-00134A マニュアル

 

74

 

 

⑦ 

(Optional) Add a global hot spare by moving the cursor to the hot spare column and pressing the +   
key, . key, or space bar. 

 

 

 

 

 

 

 

 

 

 

 

 

⑧ 

When the volume has been fully configured, press C and then select Save changes then exit this     

menu to commit the changes. The SAS BIOS CU pauses while the array is being created.   

 
 

5.2.3.2.2  Managing Hot Spares 

Follow these steps to create an IME volume with the SAS BIOS CU: 

① 

On the Adapter List screen, use the arrow keys to select an LSI Logic SAS adapter. 

② 

Press Enter to go to the Adapter Properties screen, shown in Figure. 

③ 

On the Adapter Properties screen, use the arrow keys to select RAID Properties on the screen and press Enter. 

④ 

When you are prompted to select a volume type, select Create IME Volume. The Create New Array     

screen shows a list of disks that can be added to a volume. 

⑤ 

Move the cursor to the “RAID Disk” column and select a disk. To add the disk to the volume, change   

the “No” to “Yes” by pressing the + key, . key, or space bar. 

⑥ 

Repeat this step to select a total of three to eight disks for the volume (or three to seven disks if you       

will create a global hot spare). All existing data on all the disks you select will be overwritten. As you 
add disks, the Array Size field changes to reflect the size of the new volume. 

⑦ 

(Optional) Add a global hot spare to the volume by moving the cursor to the hot spare column and 

pressing the + key, . key, or space bar. 

⑧ 

When the volume has been fully configured, press C and then select Save changes then exit this menu 

to commit the changes. The SAS BIOS CU pauses while the array is being created.