Power Communication Tech MU161X ユーザーズマニュアル
4/8/16 PORT KVM SWITCH
自 多 電 腦
自 多 電 腦
切
換 器
動
5
4/8/16 PORT KVM SWITCH
自
自
多 電 腦
切
換 器
動
6
E. If cursor☞ selects the PC which is remarked with “⊕ò” means that the PC is daisy-
chained to the SLAVE. Hit <ENTER> or <→> to enter into the cascaded SLAVE. OSD
shows the selected daisy-chained PC information (see Figure(5)). On the right side of
Line 1 of Figure(5) shows “SLAVER:??” to identity the on screen information is from??
Port of SALVER.
chained to the SLAVE. Hit <ENTER> or <→> to enter into the cascaded SLAVE. OSD
shows the selected daisy-chained PC information (see Figure(5)). On the right side of
Line 1 of Figure(5) shows “SLAVER:??” to identity the on screen information is from??
Port of SALVER.
E. Shown SLAVE PC information as Figure(5), press <←> to return to the MASTER
PC (shown as Figure(4)).
F. Press <ESC> key to come back to MAIN MENU (Shown Figure(1)).
6. <F3> key SEARCH PC function
A. On MAIN MENU screen mode, press <F3> to enter into PC NAME input mode to
search for the target PC, OSD message shown as FIGURE(6).
PC (shown as Figure(4)).
F. Press <ESC> key to come back to MAIN MENU (Shown Figure(1)).
6. <F3> key SEARCH PC function
A. On MAIN MENU screen mode, press <F3> to enter into PC NAME input mode to
search for the target PC, OSD message shown as FIGURE(6).
B. Input at most 16 characters ( <A~Z>, numerical <0~9> and <-> etc) and press
<ENTER> as confirmation. For example: input <PC12345> and hit <ENTER> to start
searching the target PC <PC12345>. When targeted PC is found, it will switch to the PC
autocratically.
C. If no PC NAME is matched, the OSD will display “ERROR” message (shown as
Figure(7)).
<ENTER> as confirmation. For example: input <PC12345> and hit <ENTER> to start
searching the target PC <PC12345>. When targeted PC is found, it will switch to the PC
autocratically.
C. If no PC NAME is matched, the OSD will display “ERROR” message (shown as
Figure(7)).
D. If the searched PC is powered off, the OSD will display “DISABLE” message
(shown as Figure(8)).
(shown as Figure(8)).
7. <F4> key EDIT PC NAME function
A. Under MAIN MENU mode: hit <F4> key to enter the edit PC name operation
(shown as Figure(9)), on the Line 1 of Figure(9) show PC : 2 indicating the current
screen information is from the second PC.
A. Under MAIN MENU mode: hit <F4> key to enter the edit PC name operation
(shown as Figure(9)), on the Line 1 of Figure(9) show PC : 2 indicating the current
screen information is from the second PC.
P C : 3 + 7
S L A V E R : 3
P O R T S E L E C T M E N U
S T U
─ ─ ─ ─ ─ ─ ─ ─ ─
─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─
1
S 3 - P C 1 1 1
2
S 3 - P C 2 2 2
+
3
E M A I L - 1
+
4
S M P T - 3
5
S 3 - P C 5 5 5
+
6
S 3 - P C 6
7
S 3 - P C 7
+
8
S 3 - P C 8
P R E S S
E S C
T O
M A I N
M E N U
P resen t s t h e O S D
s creen i n f o r m ation
i s f rom S LAV E 3
s creen i n f o r m ation
i s f rom S LAV E 3
SEARCH NAM E : ?
Figure(6)
ERROR
S E A R C H NAME : Pc12345
Figure(7)
D I SABLE
PC : 12 + 5 Pc 1 2 345
Figure(8)
P C : 2
P O R T
N A M E
E D I T
S T U
─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─
1
P C 1 - 1 1 1 1
2
P C 2 - 2 2 2 2
+
3
S L A V E R - 3
+
8
4
P C 4 - 4
5
P C 5 - 5 5 5 5
+
6
P C 6
7
S L A V E R - 7
+
8
8
P C 8
P R E S S E S C T O M A I N M E N U
Figure(9)
B. Under OSD mode: on the right side of (STU) field show the status of PC:
+ : PC is POWER ON;
+ 8: PC is daisy-chained to 8 port model series which have MASTER / SLAVE
Configuration.
C. use <↓> or <↑> key to move the cursor ☞(CURSOR), hit <ENTER> to enter the
edit PC name operation (shown as Figure(10)).
D. In Figure(10) the cursor☞ indicates to edit the name of PC2. the cursor becomes
the icon■ prompt to indicate the location you are editing. Input at most 16 characters
(<A~Z>, numerical <0~9> and <-> etc) and press <ENTER> as confirmation.
E. Edit SLAVE PC name: use <↓>, <↑>, <Page Up>, <Page Down> to select the PC
of SLAVE. Then press <→> to select the daisy-chained SLAVE PC, the OSD screen
shows as Figure (11): the right side of Line 1 shows “SLAVER:3” indicating the current
screen display is from ?? SLAVE.
+ : PC is POWER ON;
+ 8: PC is daisy-chained to 8 port model series which have MASTER / SLAVE
Configuration.
C. use <↓> or <↑> key to move the cursor ☞(CURSOR), hit <ENTER> to enter the
edit PC name operation (shown as Figure(10)).
D. In Figure(10) the cursor☞ indicates to edit the name of PC2. the cursor becomes
the icon■ prompt to indicate the location you are editing. Input at most 16 characters
(<A~Z>, numerical <0~9> and <-> etc) and press <ENTER> as confirmation.
E. Edit SLAVE PC name: use <↓>, <↑>, <Page Up>, <Page Down> to select the PC
of SLAVE. Then press <→> to select the daisy-chained SLAVE PC, the OSD screen
shows as Figure (11): the right side of Line 1 shows “SLAVER:3” indicating the current
screen display is from ?? SLAVE.