JVC LT-20A61S ユーザーズマニュアル

SET UP menu

LT-32/26A61BU/SU / LCT1996-001A-U / English

1 Press the 5 or 6 buttons to 

• Setting S-IN (S-VIDEO input) changes 

the head character from “E” to “S”. When 

an EXT terminal receives a normal video 
signal, “E2” appears on the display. This 
changes to “S2” when it receives an S-

VIDEO signal.

• Even a device which can output an S-VIDEO 

signal (Y/C signal) may output a regular 
video signal (composite signal) depending on 
the device setting. If a picture cannot appear 

because the S-IN (S-VIDEO input) setting 
has been made, read the device instruction 
manual carefully again to check for the 

device settings.

„

You can choose a signal source to be output 

from the EXT-2 terminal.
You can do this with the output signals of the 
devices connected to other EXT terminals, or 
with the picture and sound from a TV 

channel you are currently viewing.

1 Press the 5 buttons to choose 

2 Press the 6 buttons to choose an 

Then press the a button
The arrow in the menu represents a signal 

flow. The left side of the arrow shows a 
signal source output from the EXT-2 
terminal.
EXT-1/EXT-3:
The output signal of the device connected 

to an EXT terminal passes through the TV 
and is output from the EXT-2 terminal.
TV:
The picture and sound of the TV channel 
you are currently viewing are output from 

the EXT-2 terminal.

D0020-EN

OK

EXT-1

DUBBING

EXT-2

>

EXT-3

TV

EXT SETTING

D0022

OK

EXT-1

DUBBING

EXT-2

> EXT SETTING

EXT-3

TV

-EN

LT-32&26A61BUSU_Eng.book  Page 38  Tuesday, October 11, 2005  6:07 PM