Da-Lite 97981 プリント
SUGGESTED SPECIFICATIONS: projection screen(s),
(H) x (W), electrically operated 120 volt (60Hz) not more
than 2.4 amp. Shall have specially designed motor mounted inside the roller, to
be three wire with ground quick reversal type, oiled for life, with automatic
thermal overload cut-out, integral gears, capacitor and an electric brake to
prevent coasting. To have pre-set but adjustable limit switches to automatically
stop picture surface in the “up” and “down” positions. The roller to be of
aluminum. Screen fabric to be flame retardant and mildew resistant vinyl with
black masking borders standard. Each side of fabric to have a tab guide cable
(H) x (W), electrically operated 120 volt (60Hz) not more
than 2.4 amp. Shall have specially designed motor mounted inside the roller, to
be three wire with ground quick reversal type, oiled for life, with automatic
thermal overload cut-out, integral gears, capacitor and an electric brake to
prevent coasting. To have pre-set but adjustable limit switches to automatically
stop picture surface in the “up” and “down” positions. The roller to be of
aluminum. Screen fabric to be flame retardant and mildew resistant vinyl with
black masking borders standard. Each side of fabric to have a tab guide cable
system to maintain even lateral tension and hold surface flat. Bottom of fabric
to be inserted into a custom aluminum slat bar with added weight to provide
vertical tension on the screen surface. The ends of the slat to be protected by
heavy duty plastic caps enclosing a preset adjustable mechanism for screen
tensioning. Case to be a two-piece design made of extruded aluminum with a
black, lightly textured powder coat finish. Screen to include a three-position
control switch and cover plate. Screen to be listed by Underwriters’
Laboratories.
to be inserted into a custom aluminum slat bar with added weight to provide
vertical tension on the screen surface. The ends of the slat to be protected by
heavy duty plastic caps enclosing a preset adjustable mechanism for screen
tensioning. Case to be a two-piece design made of extruded aluminum with a
black, lightly textured powder coat finish. Screen to include a three-position
control switch and cover plate. Screen to be listed by Underwriters’
Laboratories.
SPECIFICATION DATA
Video (NTSC 4:3) Format Dimensions
Viewing Area (H x W)
Nominal Diagonal
Overall Length of Case
Approx. Ship. Wt.
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
108" x 144"
274 x 366
180"
457
1671⁄2"
425
205
92.9
120" x 160"
305 x 406
200"
508
185"
470
240
108.9
126" x 168"
320 x 427
210"
533
194"
493
250
113.4
132" x 176"
335 x 447
220"
559
203"
516
260
117.9
144" x 192"
366 x 488
240"
610
2201⁄2"
560
309
140.2
HDTV (16:9) Format Dimensions
Viewing Area (H x W)
Nominal Diagonal
Overall Length of Case
Approx. Ship. Wt.
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
92" x 164"
234 x 417
188"
478
186"
472
240
108.9
108" x 192"
274 x 488
220"
559
2151⁄2"
547
305
138.3
Wide (16:10) Format Dimensions
Viewing Area (H x W)
Nominal Diagonal
Overall Length of Case
Approx. Ship. Wt.
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
100" x 160"
254 x 406
189"
480
1821⁄2"
464
225
102.1
110" x 176"
279 x 447
208"
528
1993⁄4"
507
260
117.9
120" x 192"
305 x 488
226"
574
217"
551
309
140.2
Square Format Dimensions
Viewing Area (H x W)
Overall Length of Case
Approx. Ship. Wt.
In.
Cm
In.
Cm
Lbs.
Kg
9' x 12'
274 x 366
1671⁄2"
425
205
92.9
12' x 12'
366 x 366
1721⁄2"
438
220
99.8
10'6" x 14'
320 x 427
194"
493
250
113.4
14' x 14'
427 x 427
201"
511
280
127.0
12' x 16'
366 x 488
2201⁄2"
560
309
140.2
Tensioned Large Cosmopolitan
®
Electrol
®
Automatic Electric Projection Screen Model