Dataram 32GB DDR3-1600 DRST41/32GB プリント
製品コード
DRST41/32GB
DRST41
DDR3-1600, PC3L-12800, Registered, ECC, 1.35V, 240-pin DIMMs
DRST41
03-Jan-13
Copyright
2013 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.
Products in Family
DRST41/8GB (1 x 8GB 2Rx4 DIMM)
DRST41/16GB (1 x 16GB 2Rx4 DIMM)
DRST41/32GB (1 x 32GB 4Rx4 DIMM)
DRST41/16GB (1 x 16GB 2Rx4 DIMM)
DRST41/32GB (1 x 32GB 4Rx4 DIMM)
Features
Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.181
133.35 mm wide by 30 mm high (1.181
” x 5.25”)
Data Transfer Rate: 12.8 Gigabytes/sec
Operating Voltage: 1.35 V ±0.075 (1.5 V tolerant)
Fully RoHS Compliant
Thermal Sensor
Operating Voltage: 1.35 V ±0.075 (1.5 V tolerant)
Fully RoHS Compliant
Thermal Sensor
Each DRST41 upgrade consists of a single DDR3-1600
Registered ECC DIMM that conforms to
Registered ECC DIMM that conforms to
JEDEC’s DDR3,
PC3L-12800 standard. One 2K-bit EEPROM is used for
Serial Presence Detect and a combination register/PLL
with Address and Command Parity is also used. A
thermal sensor accurately monitors the DIMM module
and can prevent exceeding the maximum operating
temperature of 95C.
Serial Presence Detect and a combination register/PLL
with Address and Command Parity is also used. A
thermal sensor accurately monitors the DIMM module
and can prevent exceeding the maximum operating
temperature of 95C.
Note: The 32GB DIMM is DDR3-1333 PC3L-10600
Dataram Product
Oracle Product
Product Descriptions
DRST41/8GB
DRST41/16GB
DRST41/32GB
DRST41/16GB
DRST41/32GB
7104197
7104199
7104201
7104199
7104201
8GB DDR3L-1600/PC3L-12800 2R/2Gbit DIMM
16GB DDR3L-1600/PC3L-12800 2R/4Gbit DIMM
32GB DDR3L-1333/PC3L-10600 4R/4Gbit DIMM
16GB DDR3L-1600/PC3L-12800 2R/4Gbit DIMM
32GB DDR3L-1333/PC3L-10600 4R/4Gbit DIMM
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]