Cisco Spare 80-GB SATA Easy Swap Hard Disk Drive HDD-7815-I2-80= データシート
製品コード
HDD-7815-I2-80=
© 2006, 2008 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 2 of 8
by simply removing it (each drive is equipped with a front latch that positively mates the drive to the server) and replacing it with an unconfigured
spare drive.
DAT Tape Drive Support
The Cisco MCS 7815-I2 can support a 36-/72-GB universal-serial-bus (USB) external Digital Audio Tape (DAT) drive (part number
DAT-USB-EXT-72=) or an optional 36-/72-GB USB rack-mount DAT drive (part number DAT-USB-RM-72=). This tape drive connects
through one of the USB 2.0 ports provided by the Cisco MCS 7815-I2 server.
PRODUCT SPECIFICATIONS
Table 1 gives specifications of the Cisco MCS 7815-I2.
Table 1.
Specifications of Cisco MCS 7815-I2
Processor at Product Introduction
Processor (CPU)
Intel D dual core
Processor internal clock speed
2.8 GHz
Layer 2 cache
1024 KB
Maximum processors
1
Processors installed
1 (with 2 cores)
Basic input/output system (BIOS) type
Flash
Memory
Memory maximum
8 GB
Memory bus clock
533 MHz
Memory technology
PC2-4200 DDR2 SDRAM
Bit-error mitigation
Error Checking and Correction (ECC)
Total RAM slots
4
Memory installed
2 GB (2 x 1 GB)
Hard Disk
Hard disk installed
80 GB
Hard disk RPM
7200
Hard disk I/O transfer rate
1.5 Gbps
Hard disk average seek time
9 ms
Hard disk controller
I/O controller hub (ICH) SATA controller on planar
Hard disk type
SATA
Network Connectivity
NIC
Single onboard 10/100/1000
Connector
One RJ-45 connector on rear of server
10BASE-T cable support
Category 3, 4, or 5 unshielded twisted-pair (UTP) (2 or 4 pair) up to 328 ft (100m)
100BASE-TX cable support
Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASE-T cable support
Category 5 UTP, 5E UTP, or 6 UTP (2 pair) up to 328 ft (100m)