Rosewill RCDM-10009 ユーザーズマニュアル
Data Storage
Specifications Features
56
IT PRODUCTS
Controllers / Raid Cards
RC-215
RC-227
RC-228U2
RC-229U4
RC-215 is design for someone who needs to refresh or hook up
SATA/ ATA HDD to his system and doesn’t need any external
eSATA port.
Complinat with Serial ATA 1.0 specification.
Compatible with ATA/ATAPI-6 specifications.
Compliant with PCI Specification Rev. 2.2.
Supports all UDMA and PIO modes.
Supports ACPI.
Supports the Scatter/Gather function for the DMA/UDMA function.
Supports PCI power management V1.0 to reduce power con-
sumption.
Dual independent DMA channels.
SATA/ ATA HDD to his system and doesn’t need any external
eSATA port.
Complinat with Serial ATA 1.0 specification.
Compatible with ATA/ATAPI-6 specifications.
Compliant with PCI Specification Rev. 2.2.
Supports all UDMA and PIO modes.
Supports ACPI.
Supports the Scatter/Gather function for the DMA/UDMA function.
Supports PCI power management V1.0 to reduce power con-
sumption.
Dual independent DMA channels.
Compliant with 5Gbps PCI Express 2.0
Fully compliant with Serial ATA specifications 2.6
Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps 1.5Gbps
Supports ATA and ATAPI commands
Supports Native Command Queuing (NCQ)
Support AES-256
48 bits LBA can Break Capacity-Limit to Support HDD larger than
137GB
Hot-plug capability
Two Pin headers on board for LED connection
Support Port Multiplier Function - Both Command-Based Switch-
ing and Frame Information Structure (FIS) switching
Fully compliant with Serial ATA specifications 2.6
Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps 1.5Gbps
Supports ATA and ATAPI commands
Supports Native Command Queuing (NCQ)
Support AES-256
48 bits LBA can Break Capacity-Limit to Support HDD larger than
137GB
Hot-plug capability
Two Pin headers on board for LED connection
Support Port Multiplier Function - Both Command-Based Switch-
ing and Frame Information Structure (FIS) switching
NEC Chipset
Supports PCIe 1.0 and PCIe 2.0 motherboard
Supports up to 2 external USB3.0 Devices
- Optimized for external USB SSDs, hard drives, drive enclosures, and
USB3.0 Flash Drives
Supports Max 1.5A USB 5V bus power per USB 3.0 port
Backwards compatible with USB 2.0 & 1.1
Compliant Intel eXtensible Host Controller Interface (xHCI) Specification
0.95
Hot-Swap and Hot-Plug
Support Standard 4-pin Molex 8981 power connector or 15pin SATA power
connector
Supports 64bit and 32bit Windows 8, Windows 7, Vista, XP and 64bit 2008
R2, and Linux kernel 2.6.31 or later
Supports PCIe 1.0 and PCIe 2.0 motherboard
Supports up to 2 external USB3.0 Devices
- Optimized for external USB SSDs, hard drives, drive enclosures, and
USB3.0 Flash Drives
Supports Max 1.5A USB 5V bus power per USB 3.0 port
Backwards compatible with USB 2.0 & 1.1
Compliant Intel eXtensible Host Controller Interface (xHCI) Specification
0.95
Hot-Swap and Hot-Plug
Support Standard 4-pin Molex 8981 power connector or 15pin SATA power
connector
Supports 64bit and 32bit Windows 8, Windows 7, Vista, XP and 64bit 2008
R2, and Linux kernel 2.6.31 or later
- Ti Chipset
- Supports PCIe 1.0 and PCIe 2.0 motherboard
- Supports up to 4 external USB3.0 Devices
- Optimized for external USB SSDs, hard drives, drive enclosures, and
USB3.0 Flash Drives
- Supports Max 1.5A USB 5V bus power per USB 3.0 port
- Backwards compatible with USB 2.0 & 1.1
- Compliant Intel eXtensible Host Controller Interface (xHCI) Specification 0.96
- Hot-Swap and Hot-Plug
- Support Standard 4-pin Molex 8981 power connector or 15pin SATA power
connector
- Supports 64bit and 32bit Windows 7, Vista, XP, and support natively for
Windows 8 (32/64) and Linux kernel 2.6.31 or later
- RoHS Compliant
- Supports PCIe 1.0 and PCIe 2.0 motherboard
- Supports up to 4 external USB3.0 Devices
- Optimized for external USB SSDs, hard drives, drive enclosures, and
USB3.0 Flash Drives
- Supports Max 1.5A USB 5V bus power per USB 3.0 port
- Backwards compatible with USB 2.0 & 1.1
- Compliant Intel eXtensible Host Controller Interface (xHCI) Specification 0.96
- Hot-Swap and Hot-Plug
- Support Standard 4-pin Molex 8981 power connector or 15pin SATA power
connector
- Supports 64bit and 32bit Windows 7, Vista, XP, and support natively for
Windows 8 (32/64) and Linux kernel 2.6.31 or later
- RoHS Compliant
Model
RC-215
Type
SATA / IDE
Chipset
VIA 6421E
Internal Connectors
2 x SATA 150 + 1 x ATA 133
Interface
PCI
Transfer Rate
Up to 1.5Gb/s
Operating Systems
Supported
Windows 2000/XP/Vista, Plug n Play
support for Win7 (32/64 bit, build 7600)
Model
RC-227
Type
SATA III (6.0Gb/s)
Internal Connectors
2 x SATA 6.0Gb/s
Interface
PCI-Express 2.0
Transfer Rate
Up to 6Gb/s
Operating Systems
Supported
Drivers for Windows 7, Vista, XP and
Server 2003, 2008 32bit / 64bit
Model
RC-228U2
Type
USB 3.0
External Connectors
2 x USB3.0
Interface
PCI-Express 2.0 x1s
Transfer Rate
Up to 5Gb/s per port
Operating Systems
Supported
Windows 8, 7, 2008, Vista,
XP and Linux
Model
RC-229U4
Type
USB 3.0
External Connectors
4 x USB3.0
Interface
PCI-Express 2.0 x1
Transfer Rate
Up to 5Gb/s per port
Operating Systems
Supported
Supports 64bit and 32bit Windows 7,
Vista, XP, and support natively for Windows 8 (32/64) and
Linux kernel 2.6.31 or later
RC-230
- Marvell Chipset
- Compliant with PCI-Experss Specification v2.0 and backward compatible with
PCI-Express 1.x
- Compliant with Serial ATA Specification 3.0
- PCI Express x2 interface, and compatible with PCI Express x4, x8 and x16
slots
- Supports communication speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
- Hot plug and Hot Swap
- Supports Native Command Queuing (NCQ)
- Supports Port Multiplier FIS based switching or command based switching
-max. 4 HDDs to PM for individual drive configuration
- Compatible with SATA 6G, 3G and 1.5G Hard Drives
- Support RAID function: RAID 0, RAID 1, RAID 10 and HyperDuo
- Compliant with PCI-Experss Specification v2.0 and backward compatible with
PCI-Express 1.x
- Compliant with Serial ATA Specification 3.0
- PCI Express x2 interface, and compatible with PCI Express x4, x8 and x16
slots
- Supports communication speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
- Hot plug and Hot Swap
- Supports Native Command Queuing (NCQ)
- Supports Port Multiplier FIS based switching or command based switching
-max. 4 HDDs to PM for individual drive configuration
- Compatible with SATA 6G, 3G and 1.5G Hard Drives
- Support RAID function: RAID 0, RAID 1, RAID 10 and HyperDuo
Model
RC-230
Type
SATA III (6.0Gb/s)
External Connectors
2 x eSATA
Internal Connectors
4 x SATA III
Interface
PCI-Express 2.0 x2
Transfer Rate
Up to 6Gb/s
RAID
RAID 0/1/0+1, HyperDuo
Operating Systems
Supported
Windows 8, 7, 2008 R2, Vista, XP
(32 / 64 bit), and Linux 2.6.x
and above