Philips HDP1590 HDP1590/F7 ユーザーズマニュアル

1 Push the POWER B button for 5 seconds till the 

power indicator turns to red to turn the device on.

2 Turn the device towards a suitable projection sur-

face or wall. Note that the distance to the projection 
surface must be a minimum of 0.1 meter (0.33 feet) 
and a maximum of 0.5 meter (1.64 feet) (see Setting 
up the Device, page 4). Make sure the projector is in 
a secure position.

3 Use the focus wheel on the font of the device to 

adjust the image sharpness.

4 The first time you turn on the device, you should set 

the following settings.

5 Use the keys ¡/¢ to select the language and con-

firm with OK.

6 Use the keys ¡/¢/À/Á to select the symbol +

or - to set the date (day, month and year) and con-
firm with OK.

7 Use the keys ¡/¢ to select the date format and 

confirm with OK.

8 Use the keys ¡/¢  to select the time zone and 

confirm with OK.

9 Use the keys ¡/¢/À/Á to select the symbol +

or - to set the date (hour and minute) and confirm 
with OK.

10 Use the keys ¡/¢ to select the time format (12h 

or 24h) and confirm with OK.

11 Use the keys ¡/¢ to select the location (Home 

or Shop) and confirm with OK.
Home: for normal use.
Shop: when you choose this option, the projector 
starts in demonstration mode. In this mode, the pro-
jector automatically displays the pictures or videos 
stored in the internal memory in loop.

12 A message is displayed to give the address web site 

where the user manual can be downloaded. Press 
OK to continue.

Press the B button on the panel control of the device 
or on the remote control more than 5 seconds.

Press shortly the B button on the panel control or on 
the remote control to put the device in ECO mode.

To wake up the device, press shortly again on the 
B button.

The device has already been installed. In order to 
change the menu language, proceed as follows:

1 Use the navigation keys to select Settings.

2 Confirm with OK.

3 Select Language/ Language with ¡/¢.

4 Confirm with OK.

5 Select Menu Language with ¡/¢.

6 Confirm with OK.

7 Select you desired language with ¡/¢.

8 Confirm with OK.

9 Exit with u.

During the first installation, use OK key to 
validate your choice and continue to the next 
step, and the ¿ key to return on the previ-
ous step.

The demonstration mode can be activated or 
deactivated on the menu Setting/Mainte-
nance/Demo mode.

 If you press the power B button on the con-
trol panel for 5 seconds the unit is turned off, 
you must hold the power B  button down 
again for 5 seconds to turn it back on.

LU UST_EN_US.book  Page 12  Mercredi, 30. juillet 2014  9:22 09