D-Link Module SNMP management f DMC-1000 DMC-1002 ユーザーズマニュアル
製品コード
DMC-1002
Media Converters & Chassis
DMC-1002 Management Module
Management Module Features
Technical Specifications
Management Information & Functions Supported
Management Information & Functions Supported
This module provides SNMP-based and web-based
management of all media converter and power supply
modules installed in the DMC-1000 chassis. It features a 32-
bit, high performance RISC microprocessor executing a
real-time operating system. It provides a 10/100Mbps Fast
Ethernet port for network connection, allowing you to
configure and monitor the system through an SNMP
management station or from a PC running an Internet
browser. An RS-232 port is also provided to let you connect
to a console (PC) to set configuration.
management of all media converter and power supply
modules installed in the DMC-1000 chassis. It features a 32-
bit, high performance RISC microprocessor executing a
real-time operating system. It provides a 10/100Mbps Fast
Ethernet port for network connection, allowing you to
configure and monitor the system through an SNMP
management station or from a PC running an Internet
browser. An RS-232 port is also provided to let you connect
to a console (PC) to set configuration.
The management module periodically polls all converters
and power supplies in the chassis to collect information
regarding status and configuration settings. It also receives
traps for events such as module hot-swaps and power
failures as soon as they occur, as well as warning traps,
upon which alarms may be sounded out to alert you.
and power supplies in the chassis to collect information
regarding status and configuration settings. It also receives
traps for events such as module hot-swaps and power
failures as soon as they occur, as well as warning traps,
upon which alarms may be sounded out to alert you.
- SNMP and web-based standards
- 10/100Mbps Fast Ethernet port & RS-232 console port
- Real-time display of link, speed, duplex status of media
converters
- Menu-driven terminal program provided for managment
via console port or Telnet
- Built-in SNMP v.1 agent with MIB-II and enterprise MIBs
- Supported traps: cold start, warm start, authentication fail,
power fail, fan fail, module insertion, module pullout, port
link down and port link up
- Supports factory reset and remote software reboot
- Supports redundant backup of media converters
- Supports remote setting of configurations of Smart Media
Converter modules, like LLCF enable, LLR enable, port
enable, auto-negotiation enable
- Password protection against unauthorized access
- Configuration setting upload/download through TFTP and
the web
- Firmware upgrade through TFTP and the web
- 10/100Mbps Fast Ethernet port & RS-232 console port
- Real-time display of link, speed, duplex status of media
converters
- Menu-driven terminal program provided for managment
via console port or Telnet
- Built-in SNMP v.1 agent with MIB-II and enterprise MIBs
- Supported traps: cold start, warm start, authentication fail,
power fail, fan fail, module insertion, module pullout, port
link down and port link up
- Supports factory reset and remote software reboot
- Supports redundant backup of media converters
- Supports remote setting of configurations of Smart Media
Converter modules, like LLCF enable, LLR enable, port
enable, auto-negotiation enable
- Password protection against unauthorized access
- Configuration setting upload/download through TFTP and
the web
- Firmware upgrade through TFTP and the web
- Part Number
- Revision
- Description
- Chassis Reset
- Power status
- Revision
- Description
- Chassis Reset
- Power status
Media Converter Modules
- Link Status
- Converter Type
- Slot Occupied
- Part Number
- Revision
- Link Status
- Converter Type
- Slot Occupied
- Part Number
- Revision
Alarms
- Cold Start
- Warm Start
- Link Up
- Link Down
- Cold Start
- Warm Start
- Link Up
- Link Down
Chassis
- Authentication Failure
- Power Supply On/Off
- Power Supply Inserted
- Power Supply Removed
- Module Insertion
- Module Removal
- Module Unknown
- Module Failure
- Power Supply On/Off
- Power Supply Inserted
- Power Supply Removed
- Module Insertion
- Module Removal
- Module Unknown
- Module Failure
Active Control
- Link Loss Carry Forward
- Link Loss Return
- Module Name
- IP address
- Reset Module
- Redundant Backup
- Download software via tftp / http
- Subnet Mask
- Default Gateway
- Telnet to Console Commands
- Link Loss Carry Forward
- Link Loss Return
- Module Name
- IP address
- Reset Module
- Redundant Backup
- Download software via tftp / http
- Subnet Mask
- Default Gateway
- Telnet to Console Commands
Protocols Supported
- IP
- UDP
- SNMP
- TCP
- TFTP
- ARP
- ICMP
- HTTP
- IP
- UDP
- SNMP
- TCP
- TFTP
- ARP
- ICMP
- HTTP
LED Indicators
- Power 1, 2
- Power Fail 1, 2
- Fan Fail 1, 2 - MGM
- Console
- Link/Activity
- Power 1, 2
- Power Fail 1, 2
- Fan Fail 1, 2 - MGM
- Console
- Link/Activity
Dimensions
120 x 88 x 25 mm
120 x 88 x 25 mm
Operation Temperature
0 - 40 C
0 - 40 C
Storage Temperature
-25 - 70 C
-25 - 70 C
Operation Humidity
10% - 90%
10% - 90%
Storage Humidity
5% - 90%
5% - 90%
Emission (EMI)
- FCC Class B
- CE Mark Class B
- VCCI Class B
- FCC Class B
- CE Mark Class B
- VCCI Class B
Physical & Environmental
Page 5