Da-Lite 80841 プリント
SUGGESTED SPECIFICATIONS: projection screen(s),
(H) x (W), electrically operated by two motors and
1⁄8" steel cable to raise and lower screen. Each motor to be 120 volt (60 Hz) not
more than 2.4 amp. Motors to be three wire with ground quick reversal type,
oiled for life, with automatic thermal overload cutout, integral gears, capacitor
and a built in brake to prevent coasting. To have pre-set but adjustable limit
switches to automatically stop picture surface in the “up” and “down” positions.
Motors to turn drum to allow cable to roll bottom 5" diameter roller ”up” and
“down” on fabric. Screen to have a straight, rigid tubular metal header, 3" in
diameter. Top of fabric shall be formed into a pocket into which header shall
be inserted. 3" wide double “C” type clamps of high tensile strength cast
(H) x (W), electrically operated by two motors and
1⁄8" steel cable to raise and lower screen. Each motor to be 120 volt (60 Hz) not
more than 2.4 amp. Motors to be three wire with ground quick reversal type,
oiled for life, with automatic thermal overload cutout, integral gears, capacitor
and a built in brake to prevent coasting. To have pre-set but adjustable limit
switches to automatically stop picture surface in the “up” and “down” positions.
Motors to turn drum to allow cable to roll bottom 5" diameter roller ”up” and
“down” on fabric. Screen to have a straight, rigid tubular metal header, 3" in
diameter. Top of fabric shall be formed into a pocket into which header shall
be inserted. 3" wide double “C” type clamps of high tensile strength cast
aluminum shall be secured to header for hanging. Furnished with a wing nut
for adjusting fabric hang. Fabric shall be flame retardant and mildew resistant
fiberglass with black masking borders standard on fiberglass fabric. Fabric shall
be securely fastened to roller. The header shall be 2" longer than the width of
the fabric. Ends of the tubular header shall be protected with cast aluminum
end caps. The bottom roller, with the cable drums, will be 12" wider than the
width of fabric. Bottom inner drum shall be secured inside the bottom roller.
Bottom outer drums shall be adjustable with one bolt and two locking set
screws. Bottom roller level can be adjusted by rotating the outer adjustable
drums. Screen to be listed by Underwriters’ Laboratories.
for adjusting fabric hang. Fabric shall be flame retardant and mildew resistant
fiberglass with black masking borders standard on fiberglass fabric. Fabric shall
be securely fastened to roller. The header shall be 2" longer than the width of
the fabric. Ends of the tubular header shall be protected with cast aluminum
end caps. The bottom roller, with the cable drums, will be 12" wider than the
width of fabric. Bottom inner drum shall be secured inside the bottom roller.
Bottom outer drums shall be adjustable with one bolt and two locking set
screws. Bottom roller level can be adjusted by rotating the outer adjustable
drums. Screen to be listed by Underwriters’ Laboratories.
SPECIFICATION DATA
Dimensions
Sizes (H x W)
Overall Length of Header
Overall Length
Approx. Ship. Wt.
Matte White
Seam Location
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
10' 6" x 14'
320 x 427
170"
432
182"
462
680
308.4
Seamless
14' x 14'
427 x 427
170"
432
182"
462
689
312.5
Seamless
6' x 16'
183 x 488
194"
493
206"
523
725
328.9
Seamless
12' x 16'
366 x 488
194"
493
206"
523
741
336.1
Seamless
16' x 16'
488 x 488
194"
493
206"
523
751
340.6
Seamless
7' x 18'
213 x 549
218"
554
230"
584
791
358.8
Seamless
13' 6" x 18'
411 x 549
218"
554
230"
584
811
367.9
Seamless
18' x 18'
549 x 549
218"
554
230"
584
824
373.8
Horizontal Seam at 16'
15' x 20'
457 x 610
242"
615
254"
645
873
396.0
Seamless
20' x 20'
610 x 610
242"
615
254"
645
885
401.4
Horizontal Seam at 16'
18' x 24'
549 x 732
290"
737
302"
767
1011
458.6
Horizontal Seam at 16'
24' x 24'
732 x 732
290"
737
302"
767
1035
469.5
Horizontal Seam Every 8'
21' x 28'
640 x 853
338"
859
350"
889
1154
523.5
Horizontal Seam Every 8'
28' x 28'
853 x 853
338"
859
350"
889
1187
538.4
Horizontal Seam Every 8'
22' 6" x 30'
686 x 914
362"
920
374"
950
1222
554.3
Horizontal Seam Every 8'
30' x 30'
914 x 914
362"
920
374"
950
1259
571.1
Horizontal Seam Every 8'
Motorized Scenic Roller Screen
Automatic Electric Projection Screen Model
PRODUCT NOTES
•
Matte White: See chart on the other side for
seam locations.
seam locations.
•
High Power®: Seamless in sizes up to 8' high. Not available
in sizes over 15' high..
in sizes over 15' high..
• Specifications subject to change without notice.
• Detail dimensional drawings, wiring diagrams and
installation instructions available upon request.
• Custom formats and sizes available upon request.
Contact Da-Lite for seamless capability or seamed
requirements for custom sizes.
requirements for custom sizes.
WHEN ORDERING, MARK APPROPRIATE SELECTIONS:
1. Select size from charts on the other side.
2. Select viewing surface (All Da-Lite surfaces are GREENGUARD GOLD Certified.):
Matte White
High Power®
3. Optional accessories:
No borders (Black masking borders standard).
Extra Drop available to lower picture area more than normal.
Specify total drop at top _____ (black or white) or at bottom _____ (black or white).
30' maximum total surface height including picture area.
Radio Frequency Wireless Remote Control.
Radio Frequency Range Extender available