Audix Fireball AUDIX FIREBALL プリント

The microphone shall be of the dynamic type operating on the moving coil principle and the polar 

pattern of the microphone shall be cardioid. The capsule shall be VLM Type B. The nominal 

output impedance shall be equal to 150 ohms at 1 kHz. The microphone shall have a sensitivity of 

1.5 mV / Pa at 1 kHz and a sound pressure level  ≥140 dB. The microphone body shall machined 

of aluminum and the grill be of steel mesh. The overall dimensions shall be 21.5 mm in diameter 

at the base, 53.5 mm at the widest point on the grill and 77.5 mm in length. The microphone shall 

be the Audix FireBall™. 

 

 

                                                

The Fireball™ is a low impedance microphone and should be plugged into a “mic level” input 

on your console, mixer, or recording device. Please note that your microphone does not require 

phantom power and will not be effected in any way by phantom power should it be running 

simultaneously while the microphone is in operation.  Avoid plugging or unplugging the 

microphone from the PA system unless the channel is muted or the volume of the system turned 

down. Failure to do so may result in a loud “popping” noise which could seriously damage the 

speakers in the PA system. 

The FireBall™ has a tight (cardioid) pick-up pattern in order to help eliminate sound from other 

instruments on stage from “bleeding” into the microphone.

The FireBall™ is a low impedance microphone, however, it may be plugged directly into a guitar 

amp by using the Audix T50k impedance converter. This will allow for the proper gain structure 

and will insure the best possible sound quality.  

The FireBall™ may also be used for a wide variety of instrument and vocal applications. Working 

distance can be anywhere between 1-6 inches depending on the instruments on stage, the 

volume of the music, and the type of stage monitors.  

Allow a distance of 2-3 feet between microphones to avoid phase cancellation issues.  

*Further miking techniques may be found on our website at www.audixusa.com 

FIREBALL™

SERVICE AND WARRANTY:

This microphone is under warranty for a period of 5 years from 

any and all manufacturing defects. Should your microphone 

fail in any way, please contact the Audix Service department 

at 503-682-6933. A Return Authorization number is required 

before returning any products.

CARE AND MAINTENANCE:

The FIREBALL is manufactured to exacting specs with roadworthy 

construction. However, the capsule is highly sensitive and should be handled 

with care. Avoid extreme temperatures and be sure to store your microphone 

in the pouch provided when not in use. Moisture of any kind can adversely 

affect the sound and performance of your microphone. 

***All specifications subject to change without notice.

www.audixusa.com 

503-682-6933 Fax: 503-682-7114 

Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070

Please Check all that apply:

    Male      Female
Age: 

 

Occupation:  

Primary Instruments:       Product to be used for:    

    18 or Under 

   Musician   

   Vocal 

 

        Pro live sound

    19-25   

   Producer   

   Guitar / Bass 

        Pro recording

    26-35   

   Sound Eng. 

   Drums   

        Home recording

    36-45   

   Radio/TV   

   Keyboard  

        Rehearsal

    46-55    

   Production 

   Brass 

 

        Installation

    55 +  

 

   Other _______ 

   Woodwinds 

        School

 

 

 

 

   Strings   

        House of Worship

How did you hear about Audix?  

 

   Other ___________          Other ___________

   Magazine Ad            Online Ad  

   On-line Store            Friend                               Do you own other Audix Products?      Yes      No

   Salesman                 Other __________            Model(s) ________________________________

 

 

 

                  Have you visited the Audix website?     Yes       No  

Please register your product online at www.audixusa.com or mail this form to:

Audix Microphones P.O. Box 4010 Wilsonville, OR 97070

Name:________________________________ Model:___________________

Company:_____________________________ Serial Number:_____________

Address:______________________________ Store:____________________

City:_________________________________  Store Location:_____________

Prov./State:___________ Zip:_____________ Purchase Date:_____________

Phone: (     )___________________________ Signature:_________________

Email:________________________________ Date:____________________ 

1.1