Audix Fusion F9 AUDIX F9 プリント
製品コード
AUDIX F9
SPECIFICATIONS:
ARCHITECTS AND ENGINEERS SPECIFICATIONS:
The microphone shall be a back plate pre-polarized condenser with a cardioid polar
pattern. The microphone shall operate on 12-48 Volts phantom power and the nominal
output impedance shall be equal to 200 ohms at 1 kHz. The microphone shall have a
sensitivity of 8 mV / Pa at 1 kHz. The microphone shall have a maximum SPL level of 137
dB with a THD of 0.5%. The microphone shall be cast from zinc alloy with dimensions
of 19 mm in diameter at the base, 20 mm in diameter at the widest point and 111 mm in
length. The microphone shall be the Audix f9.
OPERATION:
The f9 will NOT operate without phantom power voltage (12-48 Volts) which is available
on most professional mic preamps and mixing devices. If phantom power is not available
on your equipment, you will have to purchase a phantom power supply (such as the
Audix APS2). Avoid plugging or unplugging the microphone from a PA system unless the
channel is muted or the volume of the system is turned down. Failure to do so may result
in a loud “popping” noise which could seriously damage the speakers in the PA system.
USER TIPS:
The f9, an excellent choice to mic any kind of acoustic instrument, has a cardioid pick-up
pattern which helps to eliminate sound from other instruments on stage from “bleeding”
into the microphone. However, the f9 is much more sensitive than a dynamic and will
pick-up sound from a greater distance. The acoustic nature of the instrument being
miked along with how loud it is will determine how far the microphone should be from
the sound source. For example, the f9 can be placed 1-2 feet above the cymbals of a
drum kit and still pick up plenty of sound, whereas for a acoustic guitar, the mic will need
to be placed within 8-12 inches to be effective.
Allow a distance of 2-3 feet between microphones to avoid phase issues.
*Further miking techniques may be found on our website at www.audixusa.com
FREQUENCY / POLARS:
Transducer Type Pre-polarized condenser
Frequency Response 40 Hz - 20 kHz
Polar Pattern
Cardioid
Output Impedance 200 ohms
Sensitivity 8 mV / Pa @ 1k
Capsule Technology
Gold vapor diaphragm
Off Axis Rejection ≥24 dB
Noise Floor
22 dB (A weighted)
Signal to Noise Ratio
72 dB
Dynamic Range
115 dB
Maximum SPL ≥137 dB
Power Requirements 12-48 volts phantom
Connector 3 pin gold plated
male XLR connector
Polarity Positive pressure on diaphragm
produces positive voltage on pin
2 relative to pin 3 of output
XLR connector
Housing / Finish
Cast zinc alloy /
Black coat
Weight 91 g / 3.2 ounces
Length 111 mm / 4.37 inches
DIMENSIONS (mm):
F9
SERVICE AND WARRANTY:
This microphone is under warranty for a period of 3 years from
any and all manufacturing defects. Should your microphone
fail in any way, please contact the Audix Service department
at 503-682-6933. A Return Authorization number is required
before returning any products.
CARE AND MAINTENANCE:
The f9 is manufactured to exacting specs with roadworthy construction.
However, the capsule is highly sensitive and should be handled with care.
Avoid extreme temperatures and be sure to store your microphone in the
pouch provided when not in use. Moisture of any kind can adversely affect
the sound and performance of your microphone.
***All specifications subject to change without notice.
www.audixusa.com
503-682-6933 Fax: 503-682-7114
Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070
AUDIX WARRANTY REGISTRATION FORM
Please Check all that apply:
Male Female
Age:
Age:
Occupation:
Primary Instruments: Product to be used for:
18 or Under
Musician
Vocal
Pro live sound
19-25
Producer
Guitar / Bass
Pro recording
26-35
Sound Eng.
Drums
Home recording
36-45
Radio/TV
Keyboard
Rehearsal
46-55
Production
Brass
Installation
55 +
Other _______
Woodwinds
School
Strings
House of Worship
How did you hear about Audix?
Other ___________ Other ___________
Magazine Ad Online Ad
On-line Store Friend Do you own other Audix Products? Yes No
Salesman Other __________ Model(s) ________________________________
Have you visited the Audix website? Yes No
Please register your product online at www.audixusa.com or mail this form to:
Audix Microphones P.O. Box 4010 Wilsonville, OR 97070
Name:________________________________ Model:___________________
Company:_____________________________ Serial Number:_____________
Address:______________________________ Store:____________________
City:_________________________________ Store Location:_____________
Prov./State:___________ Zip:_____________ Purchase Date:_____________
Phone: ( )___________________________ Signature:_________________
Email:________________________________ Date:____________________
1.1