Enlogic EN1120 データシート
The Critical Component
Models: EN1120, 1111, 1112
Overview
The EN Series Power Distribution Unit (PDU) distributes power to
devices in the rack and offers real-time metering and network
monitoring of power loads for overload avoidance, capacity &
load balancing, and energy use optimization. It can be monitored
through Web, Telnet, SNMP, or SSH interfaces. The equipment
can be only be used with ITE equipment (e.g. inside server rooms).
Features
1: Toolless mounting.
The Rack PDU has two toolless mounting pegs for 0 U mounting
capabilities in a rack or enclosure.
2: Overcurrent protection.
The Rack PDU has six (6) 16 A, 1-pole hydraulic-magnetic circuit
breakers.
3: Outlets.
These EN Series PDUs have between thirty-six (36) and forty-eight
(48) outlets. Refer to the Output Configurations section on page 2
for the number of outlets and outlet types for each model.
4: OLED.
Allows for user to view settings and monitor measurements of the
PDU.
5: Hot Swappable Network Management Card.
6: Input Buttons.
6: Input Buttons.
Allow user to navigate and control the content of the OLED
display.
7: Ethernet connection port.
Allows for IP network communication.
8: Rs485-2 Port.
Outbound communications port for connecting additional PDU to
an Rs-485 daisy chain group.
9: Sensor Ports.
Connection ports for external environmental sensors such as
temperature, humidity, dry contact, door status, and fluid leak.
10: USB Port.
Allows for data transfer using a USB flash drive.
11: Serial+ Rs485-1 Port.
Allows for serial communication connection or IN communications
port for connecting the PDU to an existing Rs485 daisy chain
group.
12: Power Cord.
Field rewireable, top or front cord option.
1m,3m,5m cord lengths available.
13: Slim Profile Design
EN Series Product Data Sheet
2
3
1
12
4
7
9
8
Reset
Unit Status
Scroll
Menu
Select
Setup
Alarms
Power
Sensors
Sensor-2
Sensor-1
Rs485-2
Serial+Rs485-1
USB
Ethernet
9
11
5
6
10
9
13