Gefen GTV-WHD-1080P-SR-EU プリント
Features*
• Wireless extension of HDMI up to 80 feet (25 meters)
• Supports resolutions up to 1080p Full HD
• HDMI Features Supported
• Dolby® TrueHD, DTS-HD® Master Audio™, and PCM digital
audio streams up to 7.1 channels are supported
• 3DTV pass-through
• HDCP pass-through
• Lip Sync
• Uncompressed High Definition A/V from source to display
• No latency
• Included IR remote allows for sequential switching between up to 8
sources/Sender units. It also features three direct access buttons for
your most frequently used sources.
• WHDI 1.0, FCC Part 15, and ETSI-compliant
• Additional Sender units available separately
• Supports resolutions up to 1080p Full HD
• HDMI Features Supported
• Dolby® TrueHD, DTS-HD® Master Audio™, and PCM digital
audio streams up to 7.1 channels are supported
• 3DTV pass-through
• HDCP pass-through
• Lip Sync
• Uncompressed High Definition A/V from source to display
• No latency
• Included IR remote allows for sequential switching between up to 8
sources/Sender units. It also features three direct access buttons for
your most frequently used sources.
• WHDI 1.0, FCC Part 15, and ETSI-compliant
• Additional Sender units available separately
Specifications*
• Frequency Band Range: 5.15 - 5.850 GHz
• Video Input Connector (Sender): (1) HDMI Type A, 19-pin, male
• Video Output Connector (Receiver): (1) HDMI Type A, 19-pin,
female
• USB Connector (Sender / Receiver): (1) Mini-B
• Power Supply (Sender): (1) 5V/1A DC with USB jack
(can also use powered USB port)
• Power Supply (Receiver): (1) 5V/2A DC
• Power Consumption (Sender / Receiver): 3W (max.) / 8W (max.)
• Dimensions (W x H x D):
• Sender Unit: 1.2” x 0.6” x 3.9” (29mm x 14.5mm x 98mm)
• Receiver Unit: 5.83” x 0.8” x 3.8” (148mm x 20mm x 96mm)
• Shipping Weight: 2.0 lbs. (0.9 kg)
• Video Input Connector (Sender): (1) HDMI Type A, 19-pin, male
• Video Output Connector (Receiver): (1) HDMI Type A, 19-pin,
female
• USB Connector (Sender / Receiver): (1) Mini-B
• Power Supply (Sender): (1) 5V/1A DC with USB jack
(can also use powered USB port)
• Power Supply (Receiver): (1) 5V/2A DC
• Power Consumption (Sender / Receiver): 3W (max.) / 8W (max.)
• Dimensions (W x H x D):
• Sender Unit: 1.2” x 0.6” x 3.9” (29mm x 14.5mm x 98mm)
• Receiver Unit: 5.83” x 0.8” x 3.8” (148mm x 20mm x 96mm)
• Shipping Weight: 2.0 lbs. (0.9 kg)
Wireless Extender for HDMI up to
80 feet (25 meters) Short Range
Wirelessly extend HDMI video at 1080p Full HD with
multichannel digital audio up to 80 feet (25 meters)
The GefenTV Wireless for HDMI Extender SR system sends high
definition audio and video to any HDTV display up to 80 feet (25
meters). It extends HDMI A/V content from computers using HDMI,
set-top boxes, Blu-ray players, and other A/V sources to remote
HDMI-compliant display(s). This wireless product is comprised of a
small Sender unit and one table-top Receiver unit. It supports HD
resolutions up to 1080p Full HD along with support for
7.1-channels of digital audio in PCM, Dolby®, or DTS® formats.
The Wireless for HDMI Extender SR transmits within the room and
does not require line-of-sight placement of transceivers for good
reception. Thanks to its small form-factor and easy to plug in
Sender unit, this product is ideal for high-definition A/V extension
within a conference room or home theater installation that requires
the quick addition of portable devices such as a presentation
laptop computer or a video camera to an existing A/V system.
Additional features allow up to eight Sender units where each
display can access up to three sources, using the included
handheld remote control.
definition audio and video to any HDTV display up to 80 feet (25
meters). It extends HDMI A/V content from computers using HDMI,
set-top boxes, Blu-ray players, and other A/V sources to remote
HDMI-compliant display(s). This wireless product is comprised of a
small Sender unit and one table-top Receiver unit. It supports HD
resolutions up to 1080p Full HD along with support for
7.1-channels of digital audio in PCM, Dolby®, or DTS® formats.
The Wireless for HDMI Extender SR transmits within the room and
does not require line-of-sight placement of transceivers for good
reception. Thanks to its small form-factor and easy to plug in
Sender unit, this product is ideal for high-definition A/V extension
within a conference room or home theater installation that requires
the quick addition of portable devices such as a presentation
laptop computer or a video camera to an existing A/V system.
Additional features allow up to eight Sender units where each
display can access up to three sources, using the included
handheld remote control.
How It Works
Plug the Sender unit directly into the HDMI output of the source.
Connect an HDMI cable from the Receiver unit to the HDTV
display. When using a PC as the source, connect the supplied
USB-to-mini-USB cable from the PC to the Sender unit. When using
sources that do not have an available powered USB port, you will
need to use the provided USB power supply. Connect the other
power supply to the DC jack on the back of the Receiver unit.
Connect the power supplies to available electrical outlets. If the
Sender and Receiver units do not pair automatically, point the IR
remote at the IR sensor window on the Receiver unit and press the
Menu button. Navigate through the on-screen menu and have the
Receiver unit look for a Sender unit. Press and hold the pairing
button on the Sender unit until the Link LED starts blinking.
Press OK on the remote. A message indicating that both the
Sender and the Receiver units have been paired will appear on the
display.
Connect an HDMI cable from the Receiver unit to the HDTV
display. When using a PC as the source, connect the supplied
USB-to-mini-USB cable from the PC to the Sender unit. When using
sources that do not have an available powered USB port, you will
need to use the provided USB power supply. Connect the other
power supply to the DC jack on the back of the Receiver unit.
Connect the power supplies to available electrical outlets. If the
Sender and Receiver units do not pair automatically, point the IR
remote at the IR sensor window on the Receiver unit and press the
Menu button. Navigate through the on-screen menu and have the
Receiver unit look for a Sender unit. Press and hold the pairing
button on the Sender unit until the Link LED starts blinking.
Press OK on the remote. A message indicating that both the
Sender and the Receiver units have been paired will appear on the
display.
Gefen, LLC
20600 Nordhoff Street, Chatsworth CA 91311
Tel. (818) 772-9100 (800) 545-6900 Fax (818) 772-9120
www.gefentv.com
*Features and specifications are subject to change without notice.
All trademarks and registered trademarks are the properties of their respective owners.
GTV-WHD-1080P-SR
®
A3