HP 767470-041 ユーザーズマニュアル

The computer uses a card that provides both WLAN and Bluetooth functionality.
The WLAN module and WWAN module are not interchangeable.

Atheros AR9485 802.11b/g/n 1x1 WiFi Adapter

675794-001

Realtek RTL8188EE 802.11bgn Wi-Fi Adapter

709848-001

Intel Dual Band Wireless-AC 3160 802.11 ac 1x1 WiFi + BT 4.0 combo adapter

710662-001

Broadcom BCM943228HMB 802.11abgn 2x2 Wi-Fi Adapter + Broadcom Bluetooth 4.0 Adapter 

730668-001

Broadcom BCM43142 802.11 bgn 1x1 Wi-Fi + BT4.0 HMC combo adapter

753076-001

Realtek RT8723BE 802.11 bgn 1x1 Wi-Fi + BT4.0 combo adapter

753077-001

Intel Dual Band Wireless-AC 7260 802.11 ac 2x2 WiFi + Intel Dual Band Wireless-AC 7260 BT 4.0 combo

adapter

756753-001

Before removing the WLAN module, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and

then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove both service doors (see 

Remove the WLAN module:

Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.

The WLAN antenna cable labeled “1” connects to the WLAN module “Main” terminal labeled

“1”. The WLAN antenna cable labeled “2” connects to the WLAN module “Aux” terminal labeled “2”. If

the computer is equipped with an 802.11a/b/g/n WLAN module, the yellow WLAN antenna cable

connects to the middle terminal on the WLAN module.

Remove the two Phillips PM2.5×3.0 screws (2) that secure the WLAN module to the computer. (The

edge of the module opposite the slot rises away from the computer.)

Component replacement procedures

51