Alcatel-Lucent OS-QNI-U3 ユーザーズマニュアル

 Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. 

To view Alcatel-Lucent Enterprise trademarks visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the 
property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent Enterprise 
assumes no responsibility for inaccuracies contained herein. Copyright © 2015 Alcatel-Lucent Enterprise. All Rights Reserved. 
201501270003EN (February)

SFP-GIG-T

1000Base-T Gb Ethernet Transceiver (SFP Multiple Source Agreement, MSA). SFP works at 1000 Mb/s speed and 
full-duplex mode.

SFP-GIG-SX

1000Base-SX Gb Ethernet optical transceiver (SFP MSA).

SFP-GIG-LX

1000Base-LX Gb Ethernet optical transceiver (SFP MSA).

SFP-GIG-LH40

1000Base-LH Gb Ethernet optical transceiver (SFP MSA). Typical reach of 40 km on 9/125 µm SMF.

SFP-GIG-LH70

1000Base-LH Gb Ethernet optical transceiver (SFP MSA). Typical reach of 70 km on 9/125 µm SMF.

SFP-10G-SR

10 Gb optical transceiver (SFP+). Supports multimode fiber over 850 nm wavelength (nominal) with an LC 
connector. Typical reach of 300 m.

SFP-10G-LR

10 Gb optical transceiver (SFP+). Supports monomode fiber over 1310 nm wavelength (nominal) with an LC 
connector. Typical reach of 10 km.

SFP-10G-ER

10 Gb optical transceiver (SFP+). Supports monomode fiber over 1550 nm wavelength (nominal) with an LC 
connector. Typical reach of 40 km.

SFP-10G-LRM

10 Gb optical transceiver (SFP+). Supports multimode fiber over 1310 nm wavelength (nominal) with an LC 
connector. Typical reach of 220 m on FDDI-grade (62.5 µm).

SFP-10G-GIG-SR

Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850 nm wavelength (nominal) with an LC 
connector. Supports 1000Base-SX and 10GBase-SR.

SFP-10G-24DWD80

10 Gb Dense Wavelength Division Multiplexing (DWDM) optical transceiver (SFP+ MSA), 1558.17 nm/Channel 24 
(100GHz ITU Grid), 80 km, LC Connector.

OS6900-SW-DC

Data Center Software for support of DCBX, FCoE and EVB on OS6900. One license required per chassis.

SFP-10G-ZR

10 Gigabit industrial optical transceiver (SFP+). Supports data transmission at 1550nm over up to 80km single 
mode fiber. LC connector type.

SFP-10G-C1M

10 Gb direct attached copper cable (1 m, SFP+)

SFP-10G-C3M

10 Gb direct attached copper cable (3 m, SFP+)

SFP-10G-C7M

10 Gb direct attached copper cable (7 m, SFP+)

QSFP-40G-SR

Four-channel 40 Gb optical transceiver (QSFP+). Supports link lengths of 100 m and 150 m, respectively, on 
OM3 and OM4 multimode fiber cables.

QSFP-40G-LR

Four-channel 40 Gb optical transceiver (QSFP+). Supports single mode fiber over 1310 nm wavelength. Typical 
reach 10 km.

QSFP-4X10G-SR

40 Gb to 4 x 10 Gb Multifiber Push-On (MPO) fiber splitter transceiver

QSFP-40G-C1M

40 Gb direct attached copper cable (1 m, QSFP+)

QSFP-40G-C3M

40 Gb direct attached copper cable (3 m, QSFP+)

QSFP-40G-C7M

40 Gb direct attached copper cable (7 m, QSFP+)

QSFP-4X10G-C1M

40 Gb to 4 x 10 Gb direct attached copper splitter cable (1m, QSFP+) 

QSFP-4X10G-C3M

40 Gb to 4 x 10 Gb direct attached copper splitter cable (3m, QSFP+)

QSFP-4X10G-C5M

40 Gb to 4 x 10 Gb direct attached copper splitter cable (5m, QSFP+)

SFP-FC-SR

Triple-speed SFP+ Fibre Channel optical transceiver. Supports multimode fiber 850nm wavelength with an LC 
connector. Supports auto-sensing 8G Fibre Channel (FC), 4GFC and 2GFC.