Alcatel-Lucent QSFP-40G-LR ユーザーズマニュアル
Part Number Listing
Enterprise Optics
Product Code
Description
ISFP-100-BXLC-D
100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional
transceiver is designed for use over single mode fiber optic on a single strand link up
to 20KM point-to-point. This transceiver is normally used in the central office (OLT)
transmits 1550nm and receives 1310nm optical signal
transceiver is designed for use over single mode fiber optic on a single strand link up
to 20KM point-to-point. This transceiver is normally used in the central office (OLT)
transmits 1550nm and receives 1310nm optical signal
ISFP-100-BXLC-U
100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional
transceiver is designed for use over single mode fiber optic on a single strand link up
to 20KM point-to-point. This transceiver is normally used in the client (ONU)
transmits 1310nm and receives 1550nm optical signal
transceiver is designed for use over single mode fiber optic on a single strand link up
to 20KM point-to-point. This transceiver is normally used in the client (ONU)
transmits 1310nm and receives 1550nm optical signal
ISFP-100-MM
100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is
designed for use over multimode fiber optic cable.
designed for use over multimode fiber optic cable.
ISFP-100-SM15
100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is
designed for use over single mode fiber optic cable up to 15KM.
designed for use over single mode fiber optic cable up to 15KM.
ISFP-100-SM40
100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is
designed for use over single mode fiber optic cable up to 40KM.
designed for use over single mode fiber optic cable up to 40KM.
ISFP-10G-ER
10 Gigabit industrial optical transceiver (SFP+). Supports monomode fiber over
1550nm wavelength (nominal) with an LC connector. Typical reach of 40Km
1550nm wavelength (nominal) with an LC connector. Typical reach of 40Km
ISFP-10G-LR
10 Gigabit industrial optical transceiver (SFP+). Supports single mode fiber over
1310nm wavelength (nominal) with an LC connector. Typical reach of 10 Km.
1310nm wavelength (nominal) with an LC connector. Typical reach of 10 Km.
ISFP-GIG-BX-D
1000Base-BX SFP transceiver with an LC type of interface. This bi-directional
transceiver is designed for use over single mode fiber optic on a single strand link up
to 10 km. Transmits 1490 nm and receives 1310 nm optical signal.
transceiver is designed for use over single mode fiber optic on a single strand link up
to 10 km. Transmits 1490 nm and receives 1310 nm optical signal.
ISFP-GIG-BX-U
1000Base-BX SFP transceiver with an LC type of interface. This bi-directional
transceiver is designed for use over single mode fiber optic on a single strand link up
to 10 km. Transmits 1310 nm and receives 1490 nm optical signal.
transceiver is designed for use over single mode fiber optic on a single strand link up
to 10 km. Transmits 1310 nm and receives 1490 nm optical signal.
ISFP-GIG-EZX
Industrial grade Gigabit SFP transceiver. Supports single mode fiber, 120 km,
1550nm, LC Connector, Digital Diagnostic Monitoring (DDM), Extended Temperature -
40/85C.
1550nm, LC Connector, Digital Diagnostic Monitoring (DDM), Extended Temperature -
40/85C.
ISFP-GIG-LH40
1000Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports
single mode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical
reach of 40 Km on 9/125 µm SMF.
single mode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical
reach of 40 Km on 9/125 µm SMF.
ISFP-GIG-LH70
1000Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports
single mode fiber over 1550nm wavelength (nominal) with an LC connector. Typical
reach of 70 Km on 9/125 µm SMF.
single mode fiber over 1550nm wavelength (nominal) with an LC connector. Typical
reach of 70 Km on 9/125 µm SMF.
ISFP-GIG-LX
1000Base-LX Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports
single mode fiber over 1310nm wavelength (nominal) with an LC connector. Typical
reach of 10 Km on 9/125 µm SMF.
single mode fiber over 1310nm wavelength (nominal) with an LC connector. Typical
reach of 10 Km on 9/125 µm SMF.
ISFP-GIG-SX
1000Base-SX Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports
multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical
reach of 300m on 62.5/125 µm MMF or 550m on 50/125 µm MMF.
multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical
reach of 300m on 62.5/125 µm MMF or 550m on 50/125 µm MMF.
ISFP-GIG-T
1000Base-T Gigabit industrial ethernet Transceiver (SFP MSA) - Supports category 5,
5E, and 6 copper cabling up to 100m. SFP supports 10/100/1000 Mbit/s and full-
duplex mode.
5E, and 6 copper cabling up to 100m. SFP supports 10/100/1000 Mbit/s and full-
duplex mode.
QSFP-40G-C1M
40 Gigabit direct attached copper cable (1m, QSFP+)
QSFP-40G-C3M
40 Gigabit direct attached copper cable (3m, QSFP+)
QSFP-40G-C40CM
40 Gigabit direct attached copper cable (40 cm, QSFP+).
QSFP-40G-C7M
40 Gigabit direct attached copper cable (7m, QSFP+)
QSFP-40G-LR
Four channel 40 Gigabit optical transceiver (QSFP+). Supports single mode fiber over
1310nm wavelength. Typical reach 10 km
1310nm wavelength. Typical reach 10 km
QSFP-40G-SR
Four channel 40 Gigabit optical transceiver (QSFP+). Supports link lengths of 100m
and 150m respectively on OM3 and OM4 multimode fiber cables.
and 150m respectively on OM3 and OM4 multimode fiber cables.
SFP-100-BXLC-D
100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver
is designed for use over single mode fiber optic on a single strand link up to 20KM
point-to-point. This transceiver is normally used in the central office (OLT)
transmits 1550nm and receives 1310nm optical signal
is designed for use over single mode fiber optic on a single strand link up to 20KM
point-to-point. This transceiver is normally used in the central office (OLT)
transmits 1550nm and receives 1310nm optical signal
SFP-100-BXLC-U
100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver
is designed for use over single mode fiber optic on a single strand link up to 20KM
point-to-point. This transceiver is normally used in the client (ONU) transmits
1310nm and receives 1550nm optical signal
is designed for use over single mode fiber optic on a single strand link up to 20KM
point-to-point. This transceiver is normally used in the client (ONU) transmits
1310nm and receives 1550nm optical signal
SFP-100-LC-MM
100Base-FX SFP transceiver with an LC type interface. This transceiver is designed
for use over multimode fiber optic cable.
for use over multimode fiber optic cable.
SFP-100-LC-SM15
100Base-FX SFP transceiver with an LC type interface. This transceiver is designed
for use over single mode fiber optic cable up to 15KM.
for use over single mode fiber optic cable up to 15KM.
updated: August 5, 2014
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies
contained herein. Copyright © 2014 Alcatel-Lucent. All rights reserved. Page 1
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies
contained herein. Copyright © 2014 Alcatel-Lucent. All rights reserved. Page 1