Brodit ProClip 854969 854969 プリント
製品コード
854969
1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all the instructions and look at the pictures before attaching the ProClip. Note, this ProClip can be
attached in either location as shown in the pictures. You can also have a mount in each location.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the
enclosed gap opener into the gap between the centerl console panel frame and the top dash trim, to widen the
gap.
2. Peel off the adhesive tape cover on the ProClip. Press the angled edge on the lower part of the ProClip into the
gap next to the gap opener.
3. Press firmly forward on the upper part of the ProClip so the angled edge hooks around the edge of the top
dash panel.
4. The ProClip is in place.
attached in either location as shown in the pictures. You can also have a mount in each location.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the
enclosed gap opener into the gap between the centerl console panel frame and the top dash trim, to widen the
gap.
2. Peel off the adhesive tape cover on the ProClip. Press the angled edge on the lower part of the ProClip into the
gap next to the gap opener.
3. Press firmly forward on the upper part of the ProClip so the angled edge hooks around the edge of the top
dash panel.
4. The ProClip is in place.
2 (2)