Gefen EXT-DVI-1CAT6-GI プリント

* Features and specifications are subject to change without notice.  

All trademarks and registered trademarks are the property of their respective owners.

Copyright© 2014 Gefen LLC

VER A5

DVI over one CAT-6 

Extension  and

Galvanic Isolation in one!

•  Helps protect patients and operators from electric shock
•  Improves imaging system performance by eliminating ground loops
•  Meets Medical Standards EN60601-1 & EN60601-1-2, 3rd Ed.

The Gefen DVI over 1 CAT6 w/ Galvanic Isolator extends a DVI source up to 
100 feet (30 meters) using a single CAT-5e cable, and up to 132 feet (40 
meters) over a single CAT-6A cable. Resolutions up to 1080p Full HD and 
1920 x 1200 (WUXGA) are supported. This HDCP-compliant extender is 
specifically designed for use in mission-critical applications where galvanic 
isolation up to 5kV and electrical decoupling between the DVI source and 
the downstream equipment is required to ensure safety. It is compliant with 
the 3rd Edition of medical equipment safety and EMC standards EN60601-1 
and EN60601-1-2. Typical applications include medical imaging 
systems where certain components of the system (such as endoscopy or 
laparoscopy cameras) come in direct contact with the patient and the 
operator.

Using the included DVI cable, connect the video source (such as a surgical 
camera) to the DVI input of the Sender unit. Connect the output of the 
Receiver unit to the next DVI component in the system such as a video scaler 
or Hi-Def display. Connect a single CAT-5e or CAT-6A cable up to the 
maximum recommended length for the cable type between the Sender and 
the Receiver units. Use the grounding studs on Sender and Receiver to 
establish independent grounding of connected equipment to the Sender and 
the Receiver units. Connect the included 5V DC power supplies to the 
locking connectors on both units, and to available electrical outlets. Power 
up all connected equipment.

•  Compliant with Medical Standards EN60601-1 and EN60601-1-2, 3rd Edition
•  Extends DVI up to 132 feet (40 meters) over one CAT-6A
•  Extends DVI up to 100 feet (30 meters) over one CAT-5e
•  Provides up to 5kV galvanic isolation between the source and the downstream
    equipment
•  Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA)
•  HDCP pass-through
•  Switchable Deep Color support
•  HPD pass-through
•  EDID management switch for rapid integration of source and display
•  EQ adjustment 8-position switch for cable skew compensation
•  Secure grounding terminals on both Sender and Receiver units
•  Locking power supply connectors
•  Surface mountable

•  Maximum Pixel Clock: 165 MHz
•  Video Input Connector (Sender): (1) DVI 29-pin, female, digital only
•  Video Output Connector (Receiver): (1) DVI 29-pin, female, digital only
•  Link Connectors (Sender/Receiver): (1) RJ-45
•  Internal/External EDID Selector (Sender): (1) DIP switch
•  Deep Color Support Selector (Sender): (1) DIP switch
•  EQ Adjustment (Receiver): (1) Rotary Switch, 8-position
•  Power Indicator (Sender/Receiver:) (1) LED, blue
•  Power Supply (Sender/Receiver): 5V DC, locking connector
•  Power Consumption (Sender/Receiver): 4W each maximum
•  Operating Temperature: + 32 to + 104 °F (0 to + 40 °C) 
•  Storage Temperature: - 4 to + 158 °F (-20 to + 70 °C)
•  Operating/Storage Humidity: 10% to 90%, RH, non-condensing
•  Atmospheric Pressure: 7.25 lbf/in2 to 15.4 lbf/in2 (50 kPa to 106 kPa)
•  MTBF: 50000 hours
•  Dimensions (W x H x D, Sender/Receiver): 5.6” x 1.1” x 3.4” 
                                                               (143mm x 28mm x 86mm)
•  Net Weight (Sender/Receiver): 0.5 lbs (0.23 kg) each
•  Shipping Weight: 3.5 lbs (1.6 kg)

EXT-DVI-1CAT6-GI