VisionTek 900729 プリント

VisionTek Part# 900729

  

The VisionTek 4 Port PCIe USB 3.0 Interface Expansion Card lets you easily add four 

SuperSpeed USB 3.0/2.0 ports to your PC or Mac® through an available PCI Express 

slot. These ports can be used to connect your computer to external hard drives, 

CD/DVD drives, MP3 players, printers, scanners, webcams, game controllers, digital 

cameras, and other devices. With each port providing 900mA of bus power, you can 

use many of your desktop devices with needing a power adapter. Each port is also 

hot swappable, so you can attach and disconnect external drives as desired. When 

used with an external drive, each port can deliver up to 5Gb/s (600MB/s) data rates 

for transferring and/or backing up music, photos, and HD movies.

 

 

•  Adds four SuperSpeed USB 3.0 ports each with up to 5Gb/s (600MB/s) data rate – 

up to 10x faster than USB 2.0. 

•  Power USB devices or charge them without needing an AC adapter... each port 

provides 900mA of power. 

•  USB 2.0/1.1 backward compatible... works with legacy USB devices.

•  Hot swap capable... add/detach devices without rebooting.

•  Plug and Play with Macs... no drivers to install.

•  Compatible with UASP (USB Attached SCSI Protocol) enclosures for faster data 

rates and a reduction in required processor resources.

It’s never been easier to expand the capabilities of your PC or Mac. Just install the 

interface expansion card into an available PCIe slot (2.0 preferred) and then run the 

included driver CD if using a Windows based machine. Use with Macs is Plug and 

Play driverless.

With backward compatibility to USB 2.0/1.0 standards, you can connect all the 

devices you presently own and not have to buy new ones. 

On a 2009 Mac Pro running OS X 10.9, the interface expansion card delivers over 

356MB/s Read and over 338MB/s Write data transfers via a VisionTek mSATA 480GB 

SSD installed in a VisionTek mSATA mini enclosure.

 

On a PC equipped with an ASUS Crosshair V Formula-Z (990FX chipset) motherboard using an AMD 8350 CPU running Windows 8, the interface 

expansion card delivers over 317MB/s Read and over 296MB/s Write data transfers with a VisionTek mSATA 240GB SSD installed in a VisionTek mSATA 

mini enclosure.

 

Both systems performance tested with Intech Software’s QuickBench disk performance utility.

•  Uses Fresco Logic FL1100 chipset for PC and Mac 

compatibility

•  Compliant with Intel’s Extensible Host Controller Interface 

(xHCI) Specification Revision 0.96

•  Compliant with PCI Express Base Specification 2.0

•  Compliant with Universal Serial Bus 3.0 Specification 

Revision 1.0

•  Supports Support UASP (USB Attached SCSI Protocol)

•  Supports all USB compliant data transfer types 

•  Supports all USB compliant peripherals 

•  Full support of real time dynamic insertion and removal of 

USB devices

•  PC or Mac computer with one available x1, x4, x8 or x16 

PCI Express 2.0/1.0 slot

•  PCI Express 2.0 interface is required to obtain maximum 

USB 3.0 bandwidth

 

•  Microsoft Windows® XP, Vista, Windows 7, Windows 8, and 

Windows 8.1 

•  Optical drive for Windows driver installation

•  OS®X 10.8.2 or later for driverless install.

•  May be able to be used with OS X versions back to 10.7.5 

if a generic USBXHCI open source USB 3.0 xHC driver is 

utilized.

•  4 Port PCIe USB 3.0 Interface Expansion Card  

•  SATA to Molex Power Cable

•  Driver CD

•  User Manual

•  18 month warranty

105 Prairie Lake Rd, East Dundee, IL 60118