Behringer CL208-WH EUROCOM CL208-WH 仕様シート

3

Summary description: The loudspeaker shall be a professional 2-way fixed-installation loudspeaker system in a steel-braced

plywood enclosure using a bypassable internal crossover network with two 8" / 200 mm low-frequency cone transducers and

a waveguide-mounted high-frequency dome driver.
Drivers: The loudspeaker system shall use two transducers:
•  Low-frequency drivers shall be 8" / 200 mm direct-radiating cone transducers
•  High-frequency driver shall be a 1.35" / 34 mm diaphragm compression driver mounted on a rotatable 90° x 70° waveguide

constructed of polypropylene

Enclosure: The loudspeaker system shall be housed in an enclosure constructed of laminated birch plywood that is internally

braced with steel. The enclosure shall be finished with durable, scuff-free black or white paint. The front of the enclosure shall

be protected with a perforated grille of powder-coated structural steel behind fabric-wrapped acoustically transparent foam.

The back of the enclosure shall have a recessed steel input plate for connectors.
Rigging and mounting: The exterior of the enclosure shall be fitted with 14 M6 threaded rigging points. The rear of the

enclosure shall have 4 M6 threaded inserts for OmniMount™ 30 series. The enclosure shall provide attachment points for an

optional yoke bracket.
I/O and connectors: The loudspeaker shall have the following connectors:
•  One NL4 connector, wired in parallel as a full-range input to the passive crossover (CL208)
•  One 4-position terminal strip with captive wire clamps and removable plastic cover, with IN terminals wired in parallel to

OUT terminals and to the NL4 connectors (CL208)

•  One 5-position terminal strip with captive wire clamps and removable plastic cover, with 70 V and 100 V terminals wired to the

primary side of the matching transformer (CL208T)

Performance criteria: The loudspeaker system shall meet the following performance criteria:
•  Nominal impedance shall be 4 Ω for models CL208 / CL208-WH
•  CL208T / CL208T-WH Transformer taps shall be 25 W, 50 W, 100 W, 200 W (70.7 V), 50 W, 100 W, 200 W (100 V)
•  Sensitivity (1 W / 1 m passive) shall be 91 dB
•  Usable frequency range (-10 dB) shall be 49 Hz - 20 kHz
•  Frequency response (±3 dB) shall be 55 Hz - 15 kHz
•  Power handling (IEC268-5, passive) shall be 200 W RMS @ 28.3 V (CL208) / 200 W RMS (CL208T)
•  Nominal dispersion shall be 90° x 70° (axis dependent on horn orientation)
•  Maximum SPL (1 m, passive) shall be 114 dB continuous and 120 dB peak (CL208/CL208T)
Dimensions and weight: The loudspeaker system shall have the following characteristics:
•  Height shall be 28.4" / 720 mm
•  Width shall be 10.2" / 260 mm
•  Depth shall be 11.9" / 302 mm
•  Net Weight for CL208 shall be no more than 32.4lbs / 14.7 kg
•  Net Weight for CL208T shall be no more than 35.9 lbs / 16.3 kg
Model: The loudspeaker shall be the BEHRINGER EUROCOM CL208/CL208-WH/CL208T/CL208T-WH.