Da-Lite Advantage Deluxe Electrol 189" 70104 プリント
製品コード
70104
SUGGESTED SPECIFICATIONS: projection screen(s),
(H) x (W). The Advantage® Deluxe Screen shall have
two motors, one to operate door and one to operate screen. Door motor
electrically operated 120 volt (60 Hz) not more than 1.2 amp, mounted inside
the roller, to be three wire with ground, quick reversal type, oiled for life, with
automatic thermal overload cutout, integral gears, capacitor and an electric
brake to prevent coasting. To have pre-set but adjustable limit switches to
automatically stop fabric door in the ”down“ position. The door will lift to the
closed position where a micro switch shall cut off the electrical current to the
door motor. Screen motor is electrically operated 120 volt (60 Hz) not more
than 2.4 amp, mounted inside the roller, to be three wire with ground quick
reversal type, oiled for life, with automatic thermal overload cutout, integral
gears, capacitor and an electric brake to prevent coasting. To have pre-set but
adjustable limit switches to automatically stop picture surface in the ”up“ and
”down“ positions. The roller to be of rigid metal. Screen fabric to be flame
retardant and mildew resistant fiberglass with black masking borders standard.
Bottom of fabric shall be formed into a pocket holding a metal rod with plastic
(H) x (W). The Advantage® Deluxe Screen shall have
two motors, one to operate door and one to operate screen. Door motor
electrically operated 120 volt (60 Hz) not more than 1.2 amp, mounted inside
the roller, to be three wire with ground, quick reversal type, oiled for life, with
automatic thermal overload cutout, integral gears, capacitor and an electric
brake to prevent coasting. To have pre-set but adjustable limit switches to
automatically stop fabric door in the ”down“ position. The door will lift to the
closed position where a micro switch shall cut off the electrical current to the
door motor. Screen motor is electrically operated 120 volt (60 Hz) not more
than 2.4 amp, mounted inside the roller, to be three wire with ground quick
reversal type, oiled for life, with automatic thermal overload cutout, integral
gears, capacitor and an electric brake to prevent coasting. To have pre-set but
adjustable limit switches to automatically stop picture surface in the ”up“ and
”down“ positions. The roller to be of rigid metal. Screen fabric to be flame
retardant and mildew resistant fiberglass with black masking borders standard.
Bottom of fabric shall be formed into a pocket holding a metal rod with plastic
caps. Case shall be a white powder coated aluminum extrusion. Bottom of
case to be self-trimming with a built-in flange around the bottom of the case.
A section of the bottom of the case shall be an aluminum door equipped with
concealed hinges so that it opens and closes automatically with the lowering
and raising of the picture surface. The balance of the bottom of the case shall
be a second hinged aluminum door with manual opening to provide access.
Junction box shall be internally integrated into the housing making it possible
to install the housing and wire to the building’s electrical system during
construction. The junction box shall contain a quick connect connector that is
mounted in the housing for easy plug-in connection to the motorized fabric
and roller assembly. The motorized fabric and roller assembly to be installed in
the case at the factory or at a later time at the job site. To be complete with
integrated low voltage control unit and three position control switch with
cover plate. Suitable for use in environmental air space in accordance with
section 300-22 (c) of the National Electric Code, and sections 2-128, 12-010 (3)
and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1. Screen to be
listed by Underwriters’ Laboratories.
case to be self-trimming with a built-in flange around the bottom of the case.
A section of the bottom of the case shall be an aluminum door equipped with
concealed hinges so that it opens and closes automatically with the lowering
and raising of the picture surface. The balance of the bottom of the case shall
be a second hinged aluminum door with manual opening to provide access.
Junction box shall be internally integrated into the housing making it possible
to install the housing and wire to the building’s electrical system during
construction. The junction box shall contain a quick connect connector that is
mounted in the housing for easy plug-in connection to the motorized fabric
and roller assembly. The motorized fabric and roller assembly to be installed in
the case at the factory or at a later time at the job site. To be complete with
integrated low voltage control unit and three position control switch with
cover plate. Suitable for use in environmental air space in accordance with
section 300-22 (c) of the National Electric Code, and sections 2-128, 12-010 (3)
and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1. Screen to be
listed by Underwriters’ Laboratories.
SPECIFICATION DATA
HDTV (16:9) Format Dimensions (2" Standard Black Drop at Top)
Viewing Area (H x W)
Nominal Diagonal
Overall Length of Case*
Approx. Ship. Wt.
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
45" x 80"
114 x 203
92"
234
96¼"
244
122
55.3
52" x 92"
132 x 234
106"
269
108¼"
275
137
57.6
54" x 96"
137 x 244
110"
279
112¼"
285
141
64.0
58" x 104"
147 x 264
119"
302
120¼"
305
153
69.4
65" x 116"
165 x 295
133"
338
132¼"
336
165
74.8
78" x 139"
198 x 353
159"
404
156¼"
397
190
86.2
90" x 160"
229 x 406
184"
467
176¼"
448
198
89.8
Wide (16:10) Format Dimensions (2" Standard Black Drop at Top)
Viewing Area (H x W)
Nominal Diagonal
Overall Length of Case*
Approx. Ship. Wt.
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
50" x 80"
127 x 203
94"
239
96¼"
244
120
54.4
571⁄2" x 92"
146 x 234
109"
277
108¼"
275
138
62.6
60" x 96"
152 x 244
113"
287
112¼"
285
141
64.0
65" x 104"
165 x 264
123"
312
120¼"
305
156
70.7
69" x 110"
175 x 279
130"
330
126¼"
321
161
73.0
721⁄2" x 116"
184 x 295
137"
348
132¼"
336
165
74.8
87" x 139"
221 x 353
164"
417
156¼"
397
190
86.2
100" x 160"
254 x 406
189"
480
176¼"
448
198
89.8
Video (NTSC 4:3) Format Dimensions (2" Standard Black Drop at Top)
Viewing Area (H x W)
Nominal Diagonal
Overall Length of Case*
Approx. Ship. Wt.
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
43" x 57"
109 x 145
72"
183
72¼"
184
83
37.6
50" x 67"
127 x 170
84"
213
82¼"
209
93
42.2
57" x 77"
145 x 196
96"
244
96¼"
244
114
51.7
60" x 80"
152 x 203
100"
254
96¼"
244
118
53.5
69" x 92"
175 x 234
120"
305
108¼"
275
128
58.1
87" x 116"
221 x 295
150"
381
132¼"
336
165
74.8
105" x 140"
267 x 356
180"
457
156¼"
397
190
86.2
120" x 160"
305 x 406
200"
508
176¼"
448
198
89.8
Square Format Dimensions (Screens With
^ Have 2" Standard Black Drop at Top)
Sizes (H x W)
Overall Length of Case*
Approx. Ship. Wt.
In.
Cm
In.
Cm
Lbs.
Kg
50" x 50"
127 x 127
62¼"
158
71
32.2
60" x 60"
152 x 152
72¼"
184
81
36.7
70" x 70"
178 x 178
82¼"
209
104
47.2
84" x 84"
213 x 213
96¼"
244
115
52.2
6' x 8'
^
183 x 244
108¼"
275
128
58.1
8' x 8'
244 x 244
108¼"
275
131
58.4
7' x 9'
^
213 x 274
120¼"
305
136
61.7
9' x 9'
^
274 x 274
120¼"
305
149
67.6
8' x 10'
^
244 x 305
132¼"
336
165
74.8
10' x 10'
305 x 305
132¼"
336
176
79.8
9' x 12'
^
274 x 366
156¼"
397
190
86.2
12' x 12'
366 x 366
156¼"
397
200
90.7
*Case length does
not include flange
not include flange
Advantage
®
Deluxe Electrol
®
Automatic Electric Projection Screen Model