Zibro SC3348 in 8713508767475 プリント

Cooling + dehumidifying + heating (heat pump): The air conditioning is a complete air treatment system. It 

can cool, dehumidify and heat the air.

Air conditioning: In COOLING mode the unit produces a pleasant and refreshing cool airflow.

Heating: In HEATING mode the unit produces a warm and comfortable airflow. Because also the free of charge 

energy from the outdoor air is used to increase the efficiency of the system.
Dehumidifying: In DRY mode the unit dehumidifies the air in the room as efficient as possible. Note: In COOLING 

mode the air is also dehumidified.
Inverter technology: maximum comfort: The Qlima DC Inverter Wall Mounted Split air conditioner continuously 

adjusts the cooling and heating capacity according the desired room temperature. When the desired temperature is 

reached, the compressor speed is gradually decreased to maintain the room temperature with a minimum of 

variation. By varying gradually the compressor capacity, the expected lifetime as well as the experienced comfort 

level will increase. Looking at the experienced comfort level for the user of the inverter system: Non-inverter air 

conditioners, which operate at a constant speed, must turn on/off the compressor to control the room temperature 

causing less comfortable temperature fluctuations.

Inverter technology: minimum energy consumption: The compressor starts to slow down as the room 

temperature reaches the desired temperature. As a result, the over all power consumption is reduced significantly 

(up to 35% less than non inverter/ conventional types).
Easy installation via "spanner Quick Connector System : The air conditioner is provided with a Spanner type 

Quick connection system which makes it easy to connect indoor unit with outdoor unit, simply pull the lever without 

the needs for tools. There is no need for additional brazing anymore. From environmental point of view it is required 

that final installation / putting into operation is done via certified refrigeration (f-gasses) engineer.
Connection via flexible tubes: The air conditioner is provided with Stainless Steel flexible refrigerant gas line and 

Soft Copper refrigerant liquid line. Due to these flexible lines the installation can be done in the most easiest way 

without the risk of folding/ cracking.

EXTRA: frost protection in outdoor unit: The outdoor unit is provided with a PTC heating cable. When the 

system is working as a heater in the wintertime the PTC heating cable will keep the drip pan in the outdoor unit 

clear of ice, making sure the condensate water can reach the drain point. Furthermore also the compressor 

crankcase is provided with a heating cable. Ensuring the unit can perform and start up at extreme wheather 

conditions. 

EXTRA: anti-corrosion treatment in outdoor unit: The Qlima Golden Fin corrosion treatment on the outdoor 

condenser heat exchanger improves the heating efficiency and accelerates the defrosting process. The unique anti 

corrosive Golden Fin coating can withstand salty air and rain in a superb way resulting in a longer expected lifetime 

of the condenser.

EXTRA: Home Freezing prevention Button: Upon pressing this button the unit will go into the freezing 

prevention mode. The unit will overrule the indoor temperature setting and set it to approx 8-10°C. In this way 

preventing your home from freezing during cold periods at the lowest possible energy consumption. When this mode 

is selected the indoor unit display will show “FP”. This button can only be operated in heating mode.

Environment friendly refrigerant R410A: The most preferred and environmental friendly refrigerant R410a is 

used in the air conditioner.

Automatic low sound mode: This air conditioner is equipped with a special automatic low sound mode which will 

be automatically activated when the room temperature has reached the desired set point temperature. In this 

automatic mode the air conditioner will operate on a whispering quiet level. 

Turbo mode: With the Turbo mode the air conditioner will reach the preset temperature in the shortest possible 

time.

3-layer air filter: The air conditioner is equipped with a 3 layer filter package to clean the circulated room air. The 

3M™ HAF air filter delivered together with this unit captures allergens like bacteria, dust and pollen from the 

circulated air with an efficiency up to 80%. Pollen are well known as an important stimulus for hay-fever allergy. The 

active carbon filter removes unpleasant odours from the air and the screen filter captures large dust particles. The 

screen filter can be cleaned with a vacuum cleaner and/or lukewarm water. Per season 2 to 3, 3M™ HAF and active 

carbon filters will be used. These filters are available in a consumer package  (including 1 3M™ HAF and 1 active 

carbon filter). 

Remote control with LCD screen: The unit can be operated with an easy to handle remote control including LCD-

display. Using the remote control the air conditioner can be operated up to a distance of approx. 8 metres.

Remote control holder: The remote control can be placed in the wall mounted remote control holder which is 

delivered together with the unit.

Adjustable airflow: The up-down airflow can be automatically changed by using the SWING mode. The left-right 

airflow can be changed manually.

Sleep Mode: This function enables the air conditioner to increase (cooling) or decrease (heating) automatically 1°C 

per hour for the first two hours and then maintain the same temperature for five hours after which the air 

conditioner will stop operating automatically. It maintains the most comfortable temperature and saves energy at 

the same time.

Fan speed setting: Select with FAN speed button: Automatic, Low, Medium or High. The LCD display on the remote 

control will show the chosen speed.

Automatic operation: The air conditioning system can be set to automatic operation for the most suitable MODE: 

Cooling, Dehumidifying or Heating, monitoring the indoor temperature.
Auto restart function: If there is any power failure during operation, the operation status before power failure is 

memorised and the unit starts operating automatically after power recovery.
Timer: Use TIMER or set a working time between 30 minutes and 24 hours. The preset time appears in the display 

of the remote control. The unit switches ON or OFF automatically when this time is passed.
Standby mode: This energy saving feature enables the unit to stay in standby mode (only 1 W energy 

consumption).

Full colour box: The unit is delivered completely with all auxiliary parts in a full colour box showing application and 

operation information in multiple languages.