Metra AX-ADXSVI-FT1 プリント
INSTAX-ADXSVI-FT1
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/17/13
INSTAX-ADXSVI-FT1
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/17/13
INSTAX-ADXSVI-FT1
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/17/13
INSTAX-ADXSVI-FT1
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/17/13
AX-ADXSVI-FT1
Fiat 500 accessory and NAV output CAN interface 2012-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• Retains OE BT/USB and 3.5mm audio
• USB updateble
• Retains R.A.P. (retained accessory power)
• Used in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• Retains OE BT/USB and 3.5mm audio
• USB updateble
Note: This harness must be used in conjunction with the AX-ADXSVI
APPLICATIONS
FIAT
500
2012-up
WIrINg uP The AX-ADXSVI-FT1
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
red wire to the ignition wire of the aftermarket radio
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue/White wire to the radio's amp turn on wire.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
AX-ADXSVI-FT1
Fiat 500 accessory and NAV output CAN interface 2012-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• Retains OE BT/USB and 3.5mm audio
• USB updateble
• Retains R.A.P. (retained accessory power)
• Used in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• Retains OE BT/USB and 3.5mm audio
• USB updateble
Note: This harness must be used in conjunction with the AX-ADXSVI
APPLICATIONS
FIAT
500
2012-up
WIrINg uP The AX-ADXSVI-FT1
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
red wire to the ignition wire of the aftermarket radio
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue/White wire to the radio's amp turn on wire.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
AX-ADXSVI-FT1
Fiat 500 accessory and NAV output CAN interface 2012-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• Retains OE BT/USB and 3.5mm audio
• USB updateble
• Retains R.A.P. (retained accessory power)
• Used in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• Retains OE BT/USB and 3.5mm audio
• USB updateble
Note: This harness must be used in conjunction with the AX-ADXSVI
APPLICATIONS
FIAT
500
2012-up
WIrINg uP The AX-ADXSVI-FT1
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
red wire to the ignition wire of the aftermarket radio
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue/White wire to the radio's amp turn on wire.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
AX-ADXSVI-FT1
Fiat 500 accessory and NAV output CAN interface 2012-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• Retains OE BT/USB and 3.5mm audio
• USB updateble
• Retains R.A.P. (retained accessory power)
• Used in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• Retains OE BT/USB and 3.5mm audio
• USB updateble
Note: This harness must be used in conjunction with the AX-ADXSVI
APPLICATIONS
FIAT
500
2012-up
WIrINg uP The AX-ADXSVI-FT1
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
red wire to the ignition wire of the aftermarket radio
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue/White wire to the radio's amp turn on wire.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.