Da-Lite Tensioned Horizon Electrol 90228 プリント
製品コード
90228
SUGGESTED SPECIFICATIONS: projection screen(s),
(H) x (W), electrically operated 120 volt (60 Hz) not
more than 2.4 amp. Shall have two specially designed motors mounted inside
two rollers, to be three wire with ground quick reversal type, oiled for life, with
automatic thermal overload cutout, integral gears, capacitor, embedded
microprocessor control and an electric brake to prevent coasting. To have
preset but adjustable limit switches to automatically stop the picture surfaces
in the “up” and “down” positions. Shall have electronic controller to adjust to
three intermediate positions. The fabric roller to be of rigid aluminum. The
mask roller to be of rigid aluminum. Screen fabric to be seamless, flame-
retardant and mildew resistant vinyl with black masking borders standard.
(H) x (W), electrically operated 120 volt (60 Hz) not
more than 2.4 amp. Shall have two specially designed motors mounted inside
two rollers, to be three wire with ground quick reversal type, oiled for life, with
automatic thermal overload cutout, integral gears, capacitor, embedded
microprocessor control and an electric brake to prevent coasting. To have
preset but adjustable limit switches to automatically stop the picture surfaces
in the “up” and “down” positions. Shall have electronic controller to adjust to
three intermediate positions. The fabric roller to be of rigid aluminum. The
mask roller to be of rigid aluminum. Screen fabric to be seamless, flame-
retardant and mildew resistant vinyl with black masking borders standard.
Each side of the fabric to have tab guide cable system to maintain even lateral
tension and hold surface flat. To have masking fabric to convert the screen to
different aspect ratios. Custom slat bar with added weight maintains vertical
tension on the screen surface. The ends of the aluminum slat to be protected
by heavy-duty plastic caps enclosing a preset adjustable mechanism for
screen tensioning. Bottom of the masking fabric shall be sewn into a pocket
holding a metal rod. Case to be of wood and be finished with a black primer
coat, ready to accept final finish by others. To be complete with a wall keypad
and dual infrared/radio frequency remote transmitter. Screen to be listed by
Underwriters’ Laboratories.
tension and hold surface flat. To have masking fabric to convert the screen to
different aspect ratios. Custom slat bar with added weight maintains vertical
tension on the screen surface. The ends of the aluminum slat to be protected
by heavy-duty plastic caps enclosing a preset adjustable mechanism for
screen tensioning. Bottom of the masking fabric shall be sewn into a pocket
holding a metal rod. Case to be of wood and be finished with a black primer
coat, ready to accept final finish by others. To be complete with a wall keypad
and dual infrared/radio frequency remote transmitter. Screen to be listed by
Underwriters’ Laboratories.
SPECIFICATION DATA
NTSC (1.33:1) Native Aspect Ratio Dimensions
Viewing Area (H x W)
NTSC (1.33)
HDTV (1.78)
Letterbox (1.85)
Cinemascope (2.35)
Overall
Length of Case*
Approx. Ship. Wt.
In.
Cm
In.
Cm
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
43" x 57"
109 x 145
32" x 57"
81 x 145
31" x 57"
79 x 145
24" x 57"
61 x 145
793⁄4"
203
87
39.5
50" x 67"
127 x 170
38" x 67"
97 x 170
36" x 67"
91 x 170
29" x 67"
74 x 170
903⁄4"
231
101
45.8
60" x 80"
152 x 203
45" x 80"
114 x 203
43" x 80"
109 x 203
34" x 80"
86 x 203
1043⁄4"
266
121
54.9
69" x 92"
175 x 234
52" x 92"
132 x 234
50" x 92"
127 x 234
39" x 92"
99 x 234
1183⁄4"
302
138
62.6
87" x 116"
221 x 295
65" x 116"
165 x 295
63" x 116"
160 x 295
491⁄2" x 116"
126 x 295
1453⁄4"
370
177
80.3
108" x 144"
274 x 366
81" x 144"
206 x 366
78" x 144"
198 x 366
61" x 144"
155 x 366
1703⁄4"
434
198
89.8
HDTV (1.78:1) Native Aspect Ratio Dimensions
Viewing Area (H x W)
HDTV (1.78)
Letterbox (1.85)
Cinemascope (2.35)
Overall Length of Case*
Approx. Ship. Wt.
In.
Cm
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
32" x 57"
81 x 145
31" x 57"
79 x 145
24" x 57"
61 x 145
783⁄4"
200
87
39.5
38" x 67"
97 x 170
36" x 67"
91 x 170
29" x 67"
74 x 170
893⁄4"
228
101
45.8
45" x 80"
114 x 203
43" x 80"
109 x 203
34" x 80"
86 x 203
1033⁄4"
264
121
54.9
52" x 92"
132 x 234
50" x 92"
127 x 234
39" x 92"
99 x 234
1153⁄4"
294
138
62.6
65" x 116"
165 x 295
63" x 116"
160 x 295
491⁄2" x 116"
126 x 295
1413⁄4"
360
177
80.3
81" x 144"
206 x 366
78" x 144"
198 x 366
61" x 144"
155 x 366
1673⁄4"
426
198
89.8
Tensioned Horizon Electrol
®
Automatic Electric Projection Screen Model
*Add 3" to overall length of case for mounting brackets.
PRODUCT NOTES
•
All viewing surfaces will be seamless.
•
All viewing surfaces are standard with black
backing except Da-Tex® and Dual Vision.
backing except Da-Tex® and Dual Vision.
•
Audio Vision, High Contrast Audio Vision, High
Contrast Cinema Perf and HD Progressive 1.1 Perf
available in sizes up to 87" x 116" in Video Format.
Contrast Cinema Perf and HD Progressive 1.1 Perf
available in sizes up to 87" x 116" in Video Format.
• Overall case length dimensions +/- 1⁄4" (6mm).
• All sizes come standard with 12" black drop at top.
• Extra drop may alter case dimensions. Contact Da-Lite
for details.
• Detail dimensional drawings, wiring diagrams and
installation instructions available upon request.
• Specifications subject to change without notice.
• Custom formats and sizes available upon request.
WHEN ORDERING, MARK APPROPRIATE SELECTIONS:
1. Select size from charts on the other side.
2. Select viewing surface (All Da-Lite surfaces are GREENGUARD GOLD Certified.):
Da-Mat®
HD Progressive 1.1 Perf
High Contrast Da-Mat®
Audio Vision
Pearlescent
High Contrast Audio Vision
Cinema Vision
Da-Tex® (Rear)
High Contrast Cinema Vision
Dual Vision
High Contrast Cinema Perf
3. Optional accessories:
220 Volt (50 Hz) Motor.
Radio Frequency Range Extender.
White box (black standard).
Silent Motor (available on sizes
up to 10' x 10').