Gefen EXT-DVIKVM-ELR プリント

The DVIKVM ELR extends any DVI and USB source to a monitor, 

touch screen display, or other digital signage application over a 

distance up to 330 feet (100 meters) using one Cat-5 cable. 

USB 2.0 data rates up to 100 Mbps are supported in addition to 

backward-compatibility with USB 1.1. The Receiver Unit allows 

the connections of up to three (3) USB devices, providing access 

to printers, scanners, cameras, external storage media, digital 

signage, and automated control systems. This product uses 

Gefen ELR technology, allowing DVI and USB signals to travel 

along the same CAT-5 cable, reducing cabling costs and 

providing easier installation.

Place the DVIKVM ELR Sender Unit next to the DVI source. Use 

the included DVI cable to connect the computer or other DVI 

source to the Sender Unit. Use the supplied USB cable to connect 

the USB host (source) device to the USB port on the Sender Unit. 

Connect the Receiver Unit to the monitor or digital signage 

display with a DVI cable. Connect the USB devices to the Receiver 

Unit. Use one Cat-5 cable, up to 330 feet (100 meters), to connect 

the Sender Unit to the Receiver Unit. Connect the included 

locking power supplies to the Sender Unit and Receiver Unit, and 

then connect both power cords to available electrical outlets.

Note:  This product does not support HDCP content with DVI 

sources.

• Supports DVI resolutions up to 1920x1200  or 1080p at 330 feet (100 meters)

•  Extends USB 2.0 up to 330 feet (100 meters)

•  Supports USB 2.0

•  Backward-compatible with USB 1.1 devices

•  Field Upgradeable via USB mini-jack

•  Works with PC and Mac computers

•  Works with PC and Mac computers

•  Locking Power Supplies

•  Wall-mountable

•  Maximum Pixel Clock: 165 MHz

•  Input Video Signal: 1.2 V p-p

•  Input DDC Signal: 5 V p-p (TTL)

•  DVI Connector (Sender / Receiver): DVI-I 29-pin, female

•  USB Connector (Sender): Type B

•  USB Connector (Receiver): (3) Type A

•  Link Connector (Sender / Receiver): (2) RJ-45 (1 per unit)

•  Service Connector for field upgrades (Sender / Receiver): USB mini

•  Power Supply (Sender / Receiver): 5V DC

•  Operating Temperature: 0 - 40 °C

•  Dimensions: 8.5" W x 1.75" H x 4.5" D

•  Shipping Weight: 6 lbs.

*Specifications subject to change without notice.

All trademarks are the properties of their respective owners.

EXT-DVIKVM-ELR

Extend DVI and USB over one CAT-5 cable up to 330 feet