Gefen GTB-HDMI-3DTV-BLK プリント
Extender for HDMI 3DTV
Gefen, LLC
20600 Nordhoff Street, Chatsworth CA 91311
Tel. (818) 772-9100 (800) 545-6900 Fax (818) 772-9120
www.gefentoolbox.com
GTB-HDMI-3DTV
Features:
Extra Long Range Extender for HDMI, 3D TV,
and IR over one CAT-5e cable
The GefenToolBox Extender for HDMI 3DTV extends HDMI
including multi-channel digital audio at resolutions of up
to 1080 Full HD up to 330 feet (100 meters) away from
any Hi Def source using one CAT-5e cable for the
extension. This product also provides an IR back channel
to control AV sources using the same CAT-5 cable
extension. Using this channel with the built-in IR "eye" on
the receiver, or an optional RMT IR Extender, simply point
IR remote(s) of the A/V device towards the display to
control Hi-Def sources as if they were located in the same
room or proximity to the display.
including multi-channel digital audio at resolutions of up
to 1080 Full HD up to 330 feet (100 meters) away from
any Hi Def source using one CAT-5e cable for the
extension. This product also provides an IR back channel
to control AV sources using the same CAT-5 cable
extension. Using this channel with the built-in IR "eye" on
the receiver, or an optional RMT IR Extender, simply point
IR remote(s) of the A/V device towards the display to
control Hi-Def sources as if they were located in the same
room or proximity to the display.
How It Works
Locate the GefenToolBox Extender for HDMI 3DTV Sender
unit next to video source equipment. Use the supplied
HDMI cable to connect the source to the Sender unit. The
Receiver unit is located close to the display which can be
up to 330 feet (100 meters) away from the Sender unit.
The display plugs into the back of the Receiver unit. For IR
extension, either the Receiver should be located so the
internal IR "eye" can see the IR signals at the display
location, or an external Gefen EXT-RMT-EXTIR IR Extender
may be plugged into the Receiver and located near the
display. Connect a Gefen EXT-2IREMIT IR Blaster to the
Sender and locate the blasters near the source equipment.
Only one CAT-5e cable connects the Sender and the
Receiver units to each other. Multi-channel digital audio is
embedded into the HDMI signal.
unit next to video source equipment. Use the supplied
HDMI cable to connect the source to the Sender unit. The
Receiver unit is located close to the display which can be
up to 330 feet (100 meters) away from the Sender unit.
The display plugs into the back of the Receiver unit. For IR
extension, either the Receiver should be located so the
internal IR "eye" can see the IR signals at the display
location, or an external Gefen EXT-RMT-EXTIR IR Extender
may be plugged into the Receiver and located near the
display. Connect a Gefen EXT-2IREMIT IR Blaster to the
Sender and locate the blasters near the source equipment.
Only one CAT-5e cable connects the Sender and the
Receiver units to each other. Multi-channel digital audio is
embedded into the HDMI signal.
Note
*Shielded (STP) CAT-5 or CAT-6 is recommended.
However, unshielded (UTP) CAT-5 or CAT-6 is acceptable.
However, unshielded (UTP) CAT-5 or CAT-6 is acceptable.
Specifications:
Specifications subject to change without notice.
All trademarks are the properties of their respective owners.
Extends 1080p Full HD and 3D TV up to 330 feet (140 meters)
using one CAT5e (or better) cable
Allows IR remote control of source devices
Fully HDCP-compliant
Locking power connectors
Easy surface mounting
using one CAT5e (or better) cable
Allows IR remote control of source devices
Fully HDCP-compliant
Locking power connectors
Easy surface mounting
•
•
•
•
•
•
•
•
•
Supported HDMI Features:
-Resolutions up to 1080p Full HD
-12 bit Deep Color
-LCPM7.1 Audio
-Dolby® TrueHD and DTS-HD Master Audio™
-3DTV Pass-through
-CEC Pass-through
-Lip Sync Pass-through
-LCPM7.1 Audio
-Dolby® TrueHD and DTS-HD Master Audio™
-3DTV Pass-through
-CEC Pass-through
-Lip Sync Pass-through
•
•
Maximum Pixel Clock: 225 MHz
Video Input Connector (Sender): (1) HDMI Type A 19-pin, female
Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female
Link Connectors (Sender/Receiver): (1) RJ-45, Shielded
Indicator LED: Red power-on LED
IR Extender Port (Receiver): 3.5mm mini-stereo jack
IR Blaster Port (Sender): 3.5mm mini-mono jack
IR "eye" window on Receiver
Power Supplies: (2) 5V DC, Locking
Power Consumption: 10W (max.)
Dimensions: 3.5" W x 3.4" H x 1" D
Video Input Connector (Sender): (1) HDMI Type A 19-pin, female
Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female
Link Connectors (Sender/Receiver): (1) RJ-45, Shielded
Indicator LED: Red power-on LED
IR Extender Port (Receiver): 3.5mm mini-stereo jack
IR Blaster Port (Sender): 3.5mm mini-mono jack
IR "eye" window on Receiver
Power Supplies: (2) 5V DC, Locking
Power Consumption: 10W (max.)
Dimensions: 3.5" W x 3.4" H x 1" D
Shipping Weight: 3 lbs.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•