Philips SoundAvia wireless speaker AD7000W AD7000W/10 ユーザーズマニュアル

10

Before connection of AD7000W to you home 
Wi-Fi network, check the points below.

1

  Make sure that your Wi-Fi router is 

powered on and working properly. 

2

  Make sure that AD7000W has been 

powered on and booted up successfully 
(see ‘Turn AD7000W on’ on page 9).

3

  Identify the type of your Wi-Fi router (see 

the user manual of your Wi-Fi router for 
details).

Scenario 1: Connect to a 
WPS router

Note

 



Before you press any button on AD7000W, make sure 
that AD7000W has been booted up successfully (see 
‘Turn AD7000W on’ on page 9).

1

  Press the WPS button on your home Wi-Fi 

router.

 

2

  Shortly after step 1, press Wi-Fi SETUP on 

the back of AD7000W.

 

» The Wi-Fi SETUP indicator blinks red, 

yellow and green alternately. 

 

» Within 2 minutes, the WI-FI SETUP 

indicator stops blinking and stays green, 
and the unit beeps. 

WPS

4 Connect 

to 

your home Wi-
Fi network for 
AirPlay

  

To connect AD7000W to your existing home 
Wi-Fi network, you need to apply your home 
Wi-Fi settings to AD7000W.

You can do this in two ways (depending on 
which type of Wi-Fi router you use):



Automatically - if your Wi-Fi router 
is WPS (Wi-Fi Protected Setup)-
enabled and supports PBC (Push 
Button Connection) (see ‘Scenario 1: 
Connect to a WPS router’ on page 
10)



Manually - if your Wi-Fi router does 
not support WPS (see ‘Scenario 2: 
Connect to a non-WPS router’ on 
page 11)

Once connected successfully, AD7000W will 
remember your home Wi-Fi settings. Then 
you can enjoy AirPlay whenever AD7000W is 
powered on and connected to your home Wi-
Fi network automatically.

 

EN