AirLive POE-FSH8PW ユーザーズマニュアル

5F, No.96, Min-Chuan Rd., Hsin-Tien Dist., New Taipei City 231, TAIWAN

POE-FSH8PW also suits for WISP application. The network planner can quickly settle the whole 
wireless system with minimum cost of cabling. The designer can use POE-FSH8PW to connect to 
AirLive’s wide coverage AP and outdoor CPE. Then connect the CPE with remote wireless base station 
for supplying stable and high quality Internet service.

Unlike ordinary web management switch that has only rudimentary 
port settings function. The POE-FSH8PW equipped with some very 
useful and advance management features. Tag based VLAN allows 
administrators to configure VLAN groups across different switches. 
Private VID function is supported to allow switches to write tag 
information into the packet. Defining complex VLAN function across 
the entire network becomes much easier.

The broadcast storm control prevents one single station flood the network with broadcast packet. 
MAC based Trunking allows combining several ports to multiply the speed of one link. The bandwidth 
control function allows the network administrator to limit the traffic by Ethernet port. Finally port mirror is 
provided to allow MIS to sniff the packet of each port for diagnostic purpose.

The POE-FSH8PW allows user to configure the switch or firmware upgrade through local LAN or over 
the Internet from web browser. In addition, it also supports Statistics Overview for network administrator 
to monitor the traffic usage of the network.

POE-FSH8PW

POE-FSH8PW

POE-FSH8PW

Note: If you are not sure whether your AP supports 24V passive POE, please check with 

your vendor. Connect an AP that is unable to withstand 24V electric power might 
damage both your AP and the switch.