Intel SR1640TH SR1640THNA ユーザーズマニュアル

製品コード
SR1640THNA
ページ / 122
Intel® Server System SR1640TH TPS 
Introduction 
Revision 1.0 
 
 
 
Intel order number: E94847-001 
1.  Introduction 
This Technical Product Specification (TPS) provides system specific information detailing the 
features, functionality, and high-level architecture of the Intel
®
 Server System SR1640TH 
including the server board S3420TH inside system.  
In addition, you can obtain design-level information for specific sub-systems by ordering the 
External Product Specifications (EPS) or External Design Specifications (EDS) for a given 
sub-system. EPS and EDS documents are not publicly available. They are only made 
available under NDA with Intel and must be ordered through your local Intel representative. 
For a complete list of available documents, refer to the Reference Documents section at the 
end of this document. 
The Intel
®
 Server System SR1640TH may contain design defects or errors known as errata 
which may cause the product to deviate from published specifications. Refer to the Intel
®
 
Server System SR1640TH Specification Update for published errata. 
1.1  Chapter Outline 
This document is divided into the following chapters: 
ƒ
  Chapter 1 – Introduction 
ƒ
  Chapter 2 – Functional Architecture 
ƒ
  Chapter 3 – Power Sub-System 
ƒ
  Chapter 4 – Cooling Sub-System 
ƒ
  Chapter 5 – Hard Disk Driver Support 
ƒ
  Chapter 6 – Front Panel Control and Indicators 
ƒ
  Chapter 7 – Configuration Jumpers 
ƒ
  Chapter 8 – Environmental and Regulatory Specifications 
ƒ
  Appendix A – Integration and Usage Tips 
ƒ
  Appendix B – Integrated BMC sensor tables 
ƒ
  Appendix C – POST code LED decoders 
ƒ
  Appendix D – POST Code Errors 
ƒ
 Glossary 
ƒ
 Reference 
Documents 
 
1.2  Server Board Use Disclaimer 
Intel Corporation server boards support add-in peripherals and contain a number of high-
density VLSI and power delivery components that need adequate airflow to cool. Intel 
ensures through its own chassis development and testing that when Intel server building 
blocks are used together, the fully integrated system will meet the intended thermal 
requirements of these components. It is the responsibility of the system integrator who 
chooses not to use Intel developed server building blocks to consult vendor datasheets and 
operating parameters to determine the amount of air flow required for their specific 
application and environmental conditions. Intel Corporation cannot be held responsible if 
components fail or the server board does not operate correctly when used outside any of 
their published operating or non-operating limits.