Intel SR1640TH SR1640THNA ユーザーズマニュアル

Functional Architecture 

Intel® Server System SR1640TH TPS 

  

Revision 

1.0 

Intel order number: E94847-001 

24 

The Integrated BMC firmware supports the Local Directory Authentication Protocol (LDAP) 
protocol for user authentication.  

Note: IPMI users/passwords and sessions are not supported over LDAP. 

The Integrated BMC provides an embedded web server for out-of-band management. User 
authentication is handled by IPMI user names and passwords. Base functionality for the 
embedded web server includes: 

ƒ

  Power Control – Limited control based on IPMI user privilege. 

ƒ

  Sensor Reading – Limited access based on IPMI user privilege. 

ƒ

  SEL Reading – Limited access based on IPMI user privilege. 

ƒ

  KVM/Media Redirection – Limited access based on IPMI user privilege. Only 

available when the Intel

®

 RMM3 Lite-V module is present. 

ƒ

  IPMI User Management – Limited access based on IPMI user privilege. 

The web server is available on all enabled LAN channels. 

See Appendix B for Integrated BMC core sensors. 

Intel Management Engine is tied to essential platform functionality. This Management Engine 
firmware includes the following applications: 

ƒ

  Platform Clocks – Tune PCH clock silicon to the parameters of a specific board, 

configure clocks at run time, power management clocks. 

ƒ

  Thermal Report – ME FW reports thermal and power information available only on 

PECI to host accessible registers / Embedded Controller via SMBus. 

 

BIOS retrieve the SMBIOS data from flash during POST, and it builds the SMBIOS type 1, 
2, 3 into SMBIOS table and then transfers the control to operating system. Operating system 
and system management software can use the SMBIOS table for system management 
purpose. 
 
2.5.5 

On Intel

®

 Server System SR1640TH, there is a dedicated utility to view the event log. There 

is one page in BIOS setup for event log viewer. It is located in Error Manager Page.