Lantronix LPS1-T Printer Server LPS1-T-02 プリント
製品コード
LPS1-T-02
15353 Barranca Parkway
|
Irvine
|
CA 92618
|
USA
|
Tel: 800.422.7055
|
Fax: 949.450.7232
|
www.lantronix.com
© 2005, Lantronix, Inc. Lantronix is a registered trademark, and EZWebCon and ActiveLinx are trademarks of Lantronix. All other trademarks are the property of their respective owners. Specifications
subject to change without notice. All rights reserved. 910-310 11/05 DGS1000
subject to change without notice. All rights reserved. 910-310 11/05 DGS1000
Features
Transport Protocols
LPS1-T: TCP/IP, IPX, NetBIOS/NetBEUI and LAT
MPS100: TCP/IP, IPX, AppleTalk,
NetBIOS/NetBEUI, and LAT
TCP/IP Protocols
ARP, RARP, ICMP, SNMP, BOOTP, DHCP, TFTP,
LPR, Telnet, HTTP (MPS100 only)
Data Rates
Parallel: Burst rate 150 Kbps
Management
SNMP Compatible: Supports MIB II
parallel MIB
Novell Compatibility:
Supports both NDS and bindery emulation
EZWebCon: Lantronix's
management software
MPS100: HTTP
Device Support
Supports printers with Centronics
parallel interface
System Software
Flash ROM Standard: downloadable
from a TCP/IP host (TFTP download),
DECnet host (MOP download) or
NetWare host
Diagnostic LEDs
LPS1-T: Good Link, OK/Network Activity
MPS100: Link, Speed, Network Activity
Compatibility
Ethernet Version 2.0/IEEE 802.3/802.3u
Agency Approvals
LPS1-T: FCC, UL, CSA, TUV, CE
MPS100: FCC, C/UL, TUV, CE
Hardware
Network Interface
LPS1-T: 10Base-T (RJ45)
MPS100: 10/100Base-T (RJ45)
MPS100: 10/100Base-T (RJ45)
Printer Interface
36-pin male Centronics, attaches directly to 36-pin female Centronics parallel printer
port supports HP Bitronics mode to provide bi-directional high speed data flow on
the parallel port
port supports HP Bitronics mode to provide bi-directional high speed data flow on
the parallel port
Power Requirements
LPS1-T: 6 VDC @ 0.7A (External adapter included), 120 or 220 VAC, 50/60 Hz
MPS100: 5 VDC @ 0.7A (External adapter included), 120 VAC or 220 VAC, 50/60 Hz
MPS100: 5 VDC @ 0.7A (External adapter included), 120 VAC or 220 VAC, 50/60 Hz
Environmental
Operating Temperature: 5° to 50°C (41° to 122°F)
Storage Temperature: -40° to 66°C (-40° to 151°F)
Heat Dissipation: 5 Watts
Storage Temperature: -40° to 66°C (-40° to 151°F)
Heat Dissipation: 5 Watts
Physical
Dimensions (L x W x H)
8.4 x 5.8 x 2.5 cm
(3.30 x 2.30 x 1.00 in)
(3.30 x 2.30 x 1.00 in)
Weight
.31 lbs (.14 kg)
Shipping Dimensions (L x W x H)
18.73 x 22.86 x 11 cm
(7.375 x 9 x 4.375 in)
(7.375 x 9 x 4.375 in)
Shipping Weight
2.7 lbs (1.23 kg)
Warranty
1-year limited warranty
Ordering Information
LPS1-T-01
Print server, direct connect parallel port, Centronics compatible, RJ45 (10Base-T) network
port, diagnostic LEDs, User Guide, CD-ROM with EZWebCon software and reference
manual, external 120 VAC power supply
Print server, direct connect parallel port, Centronics compatible, RJ45 (10Base-T) network
port, diagnostic LEDs, User Guide, CD-ROM with EZWebCon software and reference
manual, external 120 VAC power supply
LPS1-T-02
Same as above with 220 VAC power supply
Same as above with 220 VAC power supply
MPS100-11
10/100 print server, direct connect parallel port, Centronics compatible, RJ45
(10/100Base-T) network port, web based management, diagnostic LEDs, User Guide
CD-ROM with EZWebCon software and reference manual, external 120 VAC power supply
10/100 print server, direct connect parallel port, Centronics compatible, RJ45
(10/100Base-T) network port, web based management, diagnostic LEDs, User Guide
CD-ROM with EZWebCon software and reference manual, external 120 VAC power supply
MPS100-12
Same as above with 220 VAC power supply
Same as above with 220 VAC power supply
MPS100-13
Same as above without power supply (printer powered)
Same as above without power supply (printer powered)
Single-P
ort Print Serv
ers LPS-1-T/MPS100