Netgear DUALBAND WLAN WNDAP360 N300 AP WNDAP360-PES ユーザーズマニュアル

Ping the IP address of the wireless access point to verify that there is a wireless 

connection between the computer with the wireless adapter and the wireless access 
point. If the ping fails, check the network configuration (for the wireless access point, see 

Ping the default gateway to verify that there is a path from the computer with the wireless 

adapter to the default gateway. If the ping fails, check the network configuration or call the 
Internet Service Provider (ISP).

You Cannot Configure the Wireless Access Point from a 
Browser

The wireless access point is correctly installed, it is powered on, and LAN connections 

are okay. Check that the Active LED and LAN LED are on to verify that the Ethernet 
connection is okay. 

If your computer uses a fixed (static) IP address, ensure that it is using an IP address in 

the range of the wireless access point. The wireless access point’s default IP address is 
192.168.0.100, and its subnet mask is 255.255.255.0 with DHCP disabled. Make sure 
that your network configuration settings are correct.

If you are using the NetBIOS name of the wireless access point to connect, ensure that 

your computer and the wireless access point are on the same network segment or that 
there is a WINS server on your network. 

If your computer is set to Obtain an IP address automatically (DHCP client), restart it.

Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using 

Internet Explorer, click Refresh to be sure that the Java applet is loaded.

Try quitting the browser, clearing the cache, deleting the cookies, and launching the 

browser again.

Make sure that you are using the correct login information. The factory default login name 

is admin, and the password is password. Make sure that Caps Lock is off when entering 
this information.

When entering configuration settings, be sure to click the Apply button before moving to 

another screen or tab, or your changes are lost.

Click the Refresh or Reload button in the Web browser. The changes might have 

occurred, but the Web browser might be caching the old configuration.