Netgear DUALBAND WLAN WNDAP360 N300 AP WNDAP360-PES ユーザーズマニュアル

_________________________________________________________________________

Store this information in a safe place:

SSID: The service set identification (SSID) identifies the wireless local area network. You 
can customize it by using up to 32 alphanumeric characters. Write your SSID on the line. 

SSID: ___________________________________ 

The SSID in the wireless access point is the SSID you configure on the wireless adapter 
card. All wireless nodes in the same network need to be configured with the same SSID.

 

Choose the key size by circling one: 64, 128, or 152 bits.

 

Choose the key format by circling one: ASCII or HEX.

 

Choose the authentication type by circling one: Open or Shared.

Passphrase: ___________________________________ 

Note: If you select shared key, the other devices in the network will not connect unless 
they are set to shared key and have the same keys in the same positions as those in the 
wireless access point.

 

Record the WPA-PSK passphrase:

WPA-PSK Passphrase:   ________________________________

Record the WPA2-PSK passphrase:

WPA2-PSK Passphrase: ________________________________

 

For WPA, record the following settings for the primary and secondary RADIUS servers:

Server Name/IP Address: Primary ________________ Secondary _________________ 

Port:                 ___________________________________ 

Shared Secret: ___________________________________ 

 

For WPA2, record the following settings for the primary and secondary RADIUS servers:

Server Name/IP Address: Primary ________________ Secondary _________________ 

Port:                 ___________________________________ 

Shared Secret: ___________________________________ 

_________________________________________________________________________