Netgear DUALBAND WLAN WNDAP360 N300 AP WNDAP360-PES ユーザーズマニュアル
製品コード
WNDAP360-PES
Management
60
ProSafe Dual Band Wireless-N Access Point WNDAP360
Secure Shell and Telnet Management
To configure remote console features:
1.
Select Maintenance > Remote Management > Remote Console. The Remote
Console screen displays:
Console screen displays:
Figure 32.
2.
Enable or disable the remote console features:
•
Secure Shell (SSH). To enable this feature, select the Enable radio button, which is
the default setting. Select the Disable button to disable the feature.
•
Telnet. To enable this feature, select the Enable radio button. Select the Disable
button to disable the feature, which is the default setting.
3.
Click Apply to save your settings.
To manage the wireless access point over a Telnet connection:
1.
Connect an Ethernet cable to the console port of the wireless access point.
2.
Connect the other end of the cable to a VT100/ANSI terminal or a workstation.
If you attach a PC, Apple Macintosh, or UNIX workstation, start a secure
terminal-emulation program, and configure the terminal-emulation program to use the
following settings:
terminal-emulation program, and configure the terminal-emulation program to use the
following settings:
•
Baud rate: 9600 bps
•
Data bits: 8
•
Parity: none
•
Stop bit: 1
•
Flow control: none
3.
Start a secure Telnet session from the terminal or workstation to the wireless access point. A
screen similar to the following should display:
screen similar to the following should display: