Netgear DUALBAND WLAN WNDAP360 N300 AP WNDAP360-PES ユーザーズマニュアル

range of another. As a result, wireless clients can freely roam from one wireless access point 
to another and still maintain seamless connection to the network.

The autosensing capability of the ProSafe Dual Band Wireless-N Access Point WNDAP360 
allows packet transmission at up to 300 Mbps, or at reduced speeds to compensate for 
distance or electromagnetic interference. 

What Is In the Box?

The product package should contain the following items:

ProSafe Dual Band Wireless-N Access Point WNDAP360 

Power adapter and cord (12 VCD, 1.0A)

Straight-through Category 5 Ethernet cable

Resource CD, which includes this manual

Wall-mount kit made up of brackets and hardware

Contact your reseller or customer support in your area if there are any missing or damaged 
parts. 

Refer to the NETGEAR website at 

 for the telephone 

number of customer support in your area. You should keep the Installation Guide, along with 
the original packing materials, and use the packing materials to repack the wireless access 
point if you need to return it for repair. 

To qualify for product updates and product warranty, NETGEAR encourages you to register 
on the NETGEAR website at 

.

System Requirements

Before installing the wireless access point, make sure that your system meets these 
requirements:

A 10/100/1000 Mbps local area network device such as a hub or switch

The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the 

package, or one like it

A 100–120V, 50–60 Hz AC power source

A Web browser for configuration, such as Microsoft Internet Explorer 6.0 or later, or 

Mozilla 1.5 or later

At least one computer with the TCP/IP protocol installed

An 802.11a/n or 802.11b/g/n-compliant device, such as the NETGEAR® RangeMax™ 

Wireless-N Dual Band USB Adapter WNDA3100v2.