Janitza UMG 96RM-M 5222039 データシート

39

Switching to programming mode
•  Simultaneously press buttons 1 and 2 in order 

to switch to programming mode. If a user password 
was programmed, the password request will appear 
with "000". The first digit of the user password flashes 
and can be changed with button 2. The next digit is 
selected by pressing button 2 and will begin flashing. 
If the correct combination was entered or if no user 
password was programmed, the device will enter pro-
gramming mode.

•  The symbols for the programming mode (PRG) and for 

the current transformer (CT) appear. 

•  Confirm the selection with button 1. 
•  The first digit of the input area for the primary current 

starts flashing.

Current transformer primary current input
•  Change the flashing digit with button 2. 
•  Select the next digit to be changed with button 1. 

The selected digit to be changed starts flashing. 
If the entire number is flashing, the decimal point can 
be moved with button 2.

Current transformer secondary current input
•  Only 1 A or 5 A can be set as the secondary current. 
•  Select the secondary current with button 1.
•  Change the flashing digit with button 2. 

Leaving programming mode
•  Simultaneously press buttons 1 and 2 to exit the pro-

gramming mode.