Lecroy WAVEACE 2034 4-channel oscilloscope, Digital Storage oscilloscope, WaveAce 2034 データシート
製品コード
WaveAce 2034
3
Connectivity
The WaveAce provides a USB host port
on the front panel for saving screen
images, waveforms and setups to a
memory stick. A rear panel USB device
port allows for connection to a PC or
printer. Connecting and communicating
with a PC is simplified with WaveStudio
software providing full access to the
oscilloscope’s display, measurements,
and waveform data.
on the front panel for saving screen
images, waveforms and setups to a
memory stick. A rear panel USB device
port allows for connection to a PC or
printer. Connecting and communicating
with a PC is simplified with WaveStudio
software providing full access to the
oscilloscope’s display, measurements,
and waveform data.
Large Internal Storage
Saving and recalling waveforms and
setups from internal memory can save
a lot of time during test and debug. The
WaveAce can save up to 20 waveforms,
20 setups and two reference waveforms
to the internal memory.
setups from internal memory can save
a lot of time during test and debug. The
WaveAce can save up to 20 waveforms,
20 setups and two reference waveforms
to the internal memory.
Acquisition Modes
Different applications call for different
acquisition modes. The WaveAce
offers Real Time, Equivalent Time, Peak
Detect and Averaging modes to ensure
that any waveform can be captured and
displayed.
acquisition modes. The WaveAce
offers Real Time, Equivalent Time, Peak
Detect and Averaging modes to ensure
that any waveform can be captured and
displayed.
3
WaveStation Integration
With 5 basic signal types, and over 40 built-in arbitrary waveforms
LeCroy's WaveStation is a versatile waveform generator. A variety of
modulation schemes, intuitive waveform editing software and remote
control capabilities, enable versatile waveform generation of waveforms
up to 50 MHz. The 3.5” display and simple user interface make it easy
to generate a wide range of waveforms. Additionally, connecting a
WaveAce oscilloscope to the same PC enables transferring real world
signals from the WaveAce to the WaveStation.
LeCroy's WaveStation is a versatile waveform generator. A variety of
modulation schemes, intuitive waveform editing software and remote
control capabilities, enable versatile waveform generation of waveforms
up to 50 MHz. The 3.5” display and simple user interface make it easy
to generate a wide range of waveforms. Additionally, connecting a
WaveAce oscilloscope to the same PC enables transferring real world
signals from the WaveAce to the WaveStation.
LogicStudio 16 Integration
The WaveAce can be paired with LeCroy’s LogicStudio 16 to turn your
PC into a mixed signal oscilloscope with tools for capturing, viewing
and measuring analog, digital and serial signals in one place.
LogicStudio offers 16 channels, 100 MHz and up to 1 GS/s logic
analysis with I
PC into a mixed signal oscilloscope with tools for capturing, viewing
and measuring analog, digital and serial signals in one place.
LogicStudio offers 16 channels, 100 MHz and up to 1 GS/s logic
analysis with I
2
C, SPI and UART triggering and decoding which can all
be displayed alongside the analog waveforms captured on WaveAce.
When only digital debug is needed disconnect the WaveAce and use
LogicStudio as a standalone logic analyzer.
When only digital debug is needed disconnect the WaveAce and use
LogicStudio as a standalone logic analyzer.