Dostmann Electronic Dostmann electronic Temperature Data Logger 5005-1105 データシート
製品コード
5005-1105
LOG100/110/CRYO
– Data logger
G
LOG100/110/CRYO
– Data logger
G
15
14
• Start-Stop-button:
Depending on the setup configuration, you can start or Stop the data log-
ger via the mentioned Start-Stop-buttons. You have to press and hold the
buttons 3 seconds. When it starts a short acoustic signal and the green LED-
will flash and the display indication will switch from STOP to LOG.
ger via the mentioned Start-Stop-buttons. You have to press and hold the
buttons 3 seconds. When it starts a short acoustic signal and the green LED-
will flash and the display indication will switch from STOP to LOG.
• Mode-button:
By pressing the Mode-button you will see on the bottom line the Average
(AVG)-, Minimum (MIN)- and Maximum (MAX) temperature of the recorded
measurements. If the data logger is not started it will display --- instead of
AVG, MIN or MAX temperature.
(AVG)-, Minimum (MIN)- and Maximum (MAX) temperature of the recorded
measurements. If the data logger is not started it will display --- instead of
AVG, MIN or MAX temperature.
AVG:
MIN:
MAX:
AUT:
Average
Minimum
Maximum
Auto-switch
By using the AUTO-Mode (AUT) the display will switch automatically every
two seconds.
two seconds.
2.4 Display segments of LCD (Fig. 2)
• Besides the two measurements, the large LCD displays several status informa-
• Besides the two measurements, the large LCD displays several status informa-
tion. By using the Software DE-LOG-Graph you are able to switch on or off the
display, or to setup an interval how long the display will stay on when no but-
ton is pressed (snooze function). By using this function it is possible to prevent
it displaying information to unauthorized persons.
display, or to setup an interval how long the display will stay on when no but-
ton is pressed (snooze function). By using this function it is possible to prevent
it displaying information to unauthorized persons.
F:
Measurement 1 displays the current relative humidity (Log110) or the
current temperature
current temperature
Cryo
Log
(
Log100,
).
G: Unit Measurement 1 display the current measuring unit of measurement
1.
1.4.
Marking (Log100
)
• CE-conformity, EN 12830, EN 13485, Suitability for storage (S) and
transportation (T) for food storage and distribution(C), Accuracy classifica-
tion 1 (-30..+70°C), according to EN 13486 we recommend a recalibration
once per year.
tion 1 (-30..+70°C), according to EN 13486 we recommend a recalibration
once per year.
2. Operation
• For configuring the data logger, please install the Software DE-LOG-Graph
• For configuring the data logger, please install the Software DE-LOG-Graph
on a PC.
2.1 USB-Port
• When the Software Installation has been completed please connect the PC
with data logger via USB-cable. For detailed information please read the
manual of the DE-LOG-Graph-Software.
manual of the DE-LOG-Graph-Software.
2.2 Panel and display (Fig. 1)
Log100/110/CRYO
has a large display, two LEDs and two buttons.
A: LCD-display indicate humidity, temperature, external temperature(in case
of an external sensor), Low bat-warning, Max-Min-Avg-measurements,
status information
status information
B: Start-Stop-button
C: Mode-button
D: LED: green/red
E:
C: Mode-button
D: LED: green/red
E:
USB-port (with rubber cap)
2.3 Button-handling
• On the front panel there are two buttons. Both buttons can be de activated
by using the Software DE-LOG-Graph, to prevent unauthorized use.
➥
➥
LOG100/110/CRYO
14
page
121023
Manual
IN
Off").
"Bep
(Display
seconds
2
for
button
mode
pressing
by
disabled
be
can
alerts
acoustic
mode,
LOG