Lascar Electronics Easylog Temperature Data Logger EL-USB-1-LCD データシート

製品コード
EL-USB-1-LCD
ページ / 5
EL-USB-1-LCD          
Temperature Data Logger 
with LCD
Specifications liable to change without prior warning   
        Issue 3 
 03/2011                  S.L               Applies to EL-USB-1-LCD              Page 1 of 5
FEATURES
• -35 to +80°C (-31 to +176°F) measurement range
• USB interface for set-up and data download
• User-programmable alarm thresholds
• Status indication via red, green and orange LEDs
• High contrast LCD, with two and a half digit temperature
    display function
• Immediate, delayed and push-to-start logging
• Supplied with replaceable internal lithium battery and
    Windows control software
ORDERING INFORMATION
Standard Data Logger
(Data Logger, Software on 
CD, Battery)
Replacement Battery   
EL-USB-1-LCD 
BAT 3V6 1/2AA  
www.lascarelectronics.com 
    
This standalone data logger measures and stores up to 16,378 temperature readings over a -35 to +80°C (-31 to +176°F) range.  The user 
can easily set up the logging rate and start-time, and download the stored data by plugging the data logger into a PC’s USB port and running 
the purpose designed software under Windows 2000, XP, Vista, and 7. Data can then be graphed, printed and exported to other applications.  
The high contrast LCD can show a variety of temperature information. At the touch of a button, the user can cycle between the current, 
maximum and minimum stored temperatures. The data logger is supplied complete with a long-life lithium battery, which can typically allow 
logging for up to 1 year.  The data logger is protected against moisture to IP67 standard when the protective cap is fitted.
*  At 25
°C and 1 minute logging rate
 
Specifications
Minimum
Typical
Maximum
Unit
Measurement range
-35 (-31)
+80 (+176)
°C (°F)
Internal resolution
0.5 (1)
°C (°F)
Accuracy (overall error)
±0.5 (±1)
±1.5 (±3)
°C (°F)
Logging rate
every 10s
every 12hr
-
Operating temperature range
-35 (-31)
+80 (+176)
°C (°F)
1/2AA 3.6V Lithium Battery life
1*
Year
Lascar’s EasyLog USB control software is supplied free of charge with each data logger. Easy to install and use, the control software runs 
under Windows 2000, XP, Vista & 7. The software is used to set-up the data logger as well as download, graph and export data to Excel.
EL-WIN-USB (CONTROL SOFTWARE)
The software allows the following parameters to be configured:
• Logger name 
• °C, °F
• Logging rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr)
• High and low alarms
• Immediate, delayed and push-to-start logging
• Display off, on for 30 seconds after button press, or permanently on
• Data rollover (allows unlimited logging periods by overwriting the oldest
data when the memory is full)
The latest version of the control software may be downloaded free of charge from www.lascarelectronics.com