Saft LS 14500 LS14500 データシート
製品コード
LS14500
Benefits
l
Enhanced capacity
l
High voltage response, stable
during most of the lifetime of
the application
the application
l
Wide operating temperature
range (- 60 °C/+ 85°C)
l
Low self-discharge rate
(less than 1 % after 1 year of
storage at + 20 °C)
l
Easy integration into compact
systems
l
Superior resistance to
atmospheric corrosion
Key features
l
Stainless steel container
and end caps
(low magnetic signature)
(low magnetic signature)
l
Hermetic glass-to-metal sealing
l
Non-flammable electrolyte
l
Compliant with IEC 60086-4
safety standard and
IEC 60079-11 intrinsic safety
standard (class T3 assignment)
IEC 60079-11 intrinsic safety
standard (class T3 assignment)
l
Underwriters Laboratories (UL)
Component Recognition
l
Non-restricted for transport/
Non-assigned to Class 9
according to the UN
Recommendations on the
transport of dangerous goods
– Model Regulations
according to the UN
Recommendations on the
transport of dangerous goods
– Model Regulations
l
Manufactured in France, UK, China
Main applications
l
Utility metering
l
Automatic meter reading
l
Alarms and security devices
l
Tollgate systems
l
Memory back-up
l
Tracking systems
l
Automotive electronics
l
Professional electronics
Primary lithium battery
LS 14500
3.6 V Primary lithium-thionyl chloride (Li-SOCl
2
)
High energy density
AA-size bobbin cell
AA-size bobbin cell
Cell size references
R6 - AA
Electrical characteristics
(
typical values relative to cells stored for one year or less at + 30 °C max.)
Nominal capacity
2.6 Ah
(at 2 mA + 20 °C 2.0 V cut-off. The capacity restored by the cell varies
according to current drain, temperature and cut-off)
according to current drain, temperature and cut-off)
Open circuit voltage
(at + 20°C)
3.67 V
Nominal voltage
(at 0.2 mA + 20°C)
3.6 V
Nominal energy
9.36 Wh
Pulse capability: Typically up to 250 mA
(250 mA/0.1 second pulses, drained every 2 mn at + 20 °C from
undischarged cells with 10 µA base current, yield voltage readings above
3.0 V. The readings may vary according to the pulse characteristics, the
temperature, and the cell’s previous history. Fitting the cell with a capacitor
may be recommended in severe conditions. Consult Saft)
(250 mA/0.1 second pulses, drained every 2 mn at + 20 °C from
undischarged cells with 10 µA base current, yield voltage readings above
3.0 V. The readings may vary according to the pulse characteristics, the
temperature, and the cell’s previous history. Fitting the cell with a capacitor
may be recommended in severe conditions. Consult Saft)
Maximum recommended continuous current
50 mA
(Higher currents possible, consult Saft)
Storage
(recommended)
+ 30°C (+ 86°F) max
(for more severe conditions, consult Saft)
Operating temperature range
- 60°C/+ 85°C
(Operation above ambient T may lead to reduced capacity and
(- 76°F/+ 185°F)
lower voltage readings at the beginning of pulses. Consult Saft)
Physical characteristics
Diameter (max)
14.55 mm (0.57 in)
Height (max)
50.3 mm (1.98 in)
Typical weight
16.7 g (~ 0.6 oz)
Li metal content
approx. 0.7 g
Available termination suffix
CN, CNR
radial tabs
2 PF, 3 PF, 3 PF RP, 4 PF
radial pins
CNA (AX)
axial leads
FL
flying leads...etc.
September 2009