Voltcraft LX-1108 Lux-Meter, illumination measuring device, Brightness meter, 0 à 400 000 lx LX-1108 ユーザーズマニュアル
製品コード
LX-1108
Making measurements
Make sure you are a safe distant from hot sources of
light. There is risk of burning!
light. There is risk of burning!
Never stare directly into a bright light source. This
could cause damage to your eyes
could cause damage to your eyes
The Luxmeter has various extra functions that ease operation and
handling.
These extra functions are:
handling.
These extra functions are:
Auto power OFF function
In order to avoid that the operating life of the battery is shortened
unnecessarily, an automatic switch-off function has been imple-
mented. The device will be automatically turned off if no button is
pressed for longer than 10 minutes. You can switch the device back
on with the "Power" button.
The Auto-Power-OFF function is deactivated as soon as you go into
"REC" mode.
In order to avoid that the operating life of the battery is shortened
unnecessarily, an automatic switch-off function has been imple-
mented. The device will be automatically turned off if no button is
pressed for longer than 10 minutes. You can switch the device back
on with the "Power" button.
The Auto-Power-OFF function is deactivated as soon as you go into
"REC" mode.
HOLD/Peak function
Pressing the "HOLD" button holds the measurement made at that
moment. Press again to switch back to the continuous measuring
mode.
A Peak has also been built in to measure continuous peak values.
Press the "HOLD" button for 2-3 seconds to go to this mode.
"HOLD" appears on the display. Only the momentary highest value
will be displayed. Press the "HOLD" button again for 2-3 seconds to
go out of this mode.
Pressing the "HOLD" button holds the measurement made at that
moment. Press again to switch back to the continuous measuring
mode.
A Peak has also been built in to measure continuous peak values.
Press the "HOLD" button for 2-3 seconds to go to this mode.
"HOLD" appears on the display. Only the momentary highest value
will be displayed. Press the "HOLD" button again for 2-3 seconds to
go out of this mode.
24