Eaton Comet EXtreme Rack UPS, 6 kVA, standard module 67895 プリント

Single-phase UPS - 

Headquarters
140, avenue Jean-Kuntzmann
ZIRST - Montbonnot Saint-Martin
38334 Saint-Ismier Cedex - France
Tel.: +33 (0)4 76 18 30 00

Solution-Pac software suite
supplied on CD with each unit
To control the protected servers (clean
shutdown) and for local or remote
supervision of the UPS.

Management-Pac 2 software suite
on CD
NMS integration kit: HP Openview, 
IBM Tivoli Netview, CA Unicenter, etc. 

SNMP/Web network card
To connect the UPS to the Ethernet
10/100 network, to relay SNMP
warnings and to supervise the UPS 
via a single Web interface.

Environment Sensor 
for the SNMP/Web card
SNMP and Web monitoring of Temperature
& Humidity & the status of 2 contacts.

JBus/ModBus card
To connect the UPS to a building
management system. 

Status information card
To relay the status of the UPS in the form
of free potential contacts plus emergency
stop.

Remote LCD display for controlling
the UPS
To remotely locate the interface of the UPS
up to 25 m and to display its parameters.

1-year warranty, including batteries.
Standard exchange of the product,
including the battery module, 
if it proves to be defective.

◗

Warranty+: peace of mind for your UPS,
extended 3-year warranty with
standard on-site exchange with the
minimum of delay.

◗

Start Up+: guarantee of on-site
repair of the UPS efficient, quick 
and compliant with specifications.

◗

Warranty+ Silver: includes Warranty+
and Start Up+.

◗

Warranty+ Gold: guarantee of
continuity of service for the UPS,
includes Warranty+, Start Up+ 
and 3 site visits.

◗

Teleservice / e-Teleservice: secure
remote monitoring of the UPS via 
the telephone network / Internet.

Rear view of the Comet EXtreme 6

ON/OFF

Battery operation

Operation in ON-LINE mode

Operation in manual bypass mode

Test of the indicator lamps
or shutdown of the buzzer

Overload

Electronic fault

Battery fault

Ambient temperature > 40°C

Press and hold to display the % 
of power used

% battery capacity

RS232 communication port

Battery circuit-breaker

EXB battery extension
connector module

2 communication slots

Connector module

Input/output 
terminal block

Manual bypass

Due to developments in technical standards and the equipment described in this document, we cannot be held liable for complianc

e with the characteristics indicated by the images and text unless they are confirmed by us. All the brand names referred to in

this document are protected by copyright.

Publication: MGE UPS SYSTEMS (July 2004) - Design and rewriting: 3c-evolution.com - Integration: Pamplemousse: +33 4 79 37 87 6

6 – Translation: TTP: +33 4 78 66 47 99.

1: Depending on the country, visit

www.mgeups.com/services.

Performances
Power output 

3 kWatts 

3,9 kWatts 

6 kWatts 

8 kWatts 

Technology 

On-line double conversion

Input voltage

160 to 265 V at 100 % load
120 to 265 V at   65 % load

85 to 265 V at   50 % load

Input frequency

50/60 Hz (+/- 10 %)

Efficiency

92 %

Current distortions (THDI)

< 5 %

Overload capacity

250 % 1 s ; 160 % 10 s ; 130 % 60 s

Output voltage

200/208/230/240/250 Volts

Output frequency

50/60 Hz automatic selection

Operating temperature

0°C to 40°C in continuous operation

Battery capacity at 70 % load / 100 % load (typical values after 3 discharge cycles, batteries 3 to 5 years old)
Standard endurance

20 mins/12 mins 

12 mins/9 mins 

20 mins/12 mins 

12 mins/9 mins

LA endurance

45 mins/30 mins 

35 mins/20 mins 

45 mins/30 mins 

35 mins/20 mins

X LA endurance 

(1)

70 mins/55 mins 

55 mins/40 mins 

70 mins/55 mins 

55 mins/40 mins

Connection
Input/output terminal block (optional

Flexible cable 4 to 10 mm

2

Flexible cable 10 mm

2

Comet PDU terminal strip) 

Rigid cable 4 to 16 mm

2

Rigid cable 10 to 16 mm

2

Communication
Port 

1 RS 232

Communication slots 

2 slots for transverse-format cards (HTTP.XMLWebcard, Jbus, etc.)

Standards and certifications
Performance and safety 

EN 50091-3 ; EN 50091-1 ; IEC 60 950.

EMC

EN 50091-2 ; EN 55022/B,EN 55011/B, IEC 61000-4, IEC 61000-3-2.

Certification 

TÜV, GS mark, C-Tick,CE

Dimensions (H x L x D in mm) and weights
Comet EXtreme (standard endurance)
tower format 

443 x 346 x 465 ; 62 kg 

443 x 562 x 465 ; 118 kg

rack format 

354 (8U) x 483 x 462 ; 69 kg 

575 (13 U) x 483 x 462 ; 129 kg

Comet EXtreme Power Module
tower format 

443 x 173 x 465 ; 14 kg 

443 x 216 x 465 ; 22 kg

rack format

177 (4U) x 483 x 462 ; 18 kg 

221 (5U) x 483 x 462 ; 27 kg

Comet EXB Battery Module
tower format 

443 x 173 x 465 ; 48 kg 

443 x 346 x 465 ; 96 kg

rack format 

177 (4U) x 483 x 462 ; 51 kg 

354 (8U) x 483 x 462 ; 102 kg

Comet CLA Charger Module
tower format 

443 x 173 x 465 ; 14 kg 

443 x 346 x 465 ; 28 kg

rack format 

177 (4U) x 483 x 462 ; 17 kg 

354 (8U) x 483 x 462 ; 34 kg

Standard endurance UPS
tower format  EMC Level A 

67 861 

67 881 

67 901 

67 921

EMC Level B + EPO 

67 865 

67 885 

67 905 

67 925

rack format

EMC Level B 

67 875 

67 895 

67 915 

67 935

EMC Level B + EPO 

67 873 + 67 991 

67 893 + 67 991 

67 913 + 67 995 

67 933 + 67 995

Comet EXB Battery Module
standard tower format / EPO 

67 970 / 67 971 

67 974 / 67 975

standard rack format / EPO 

67 990 / 67 991 

67 994 / 67 995

Comet EXtreme Power Module
tower format  EMC Level A 

67 860 

67 880 

67 900 

67 920

EMC Level B 

67 863 

67 883 

67 903 

67 923

rack format

EMC Level B 

67 873 

67 893 

67 913 

67 933

Comet CLA Charger Module
tower / rack formats

67 886 / 67 896 

67 926 / 67 936

1: Higher battery capacities available in 2 XLA - contact us.

Operation in automatic bypass
mode